Prediction of grain structure in direct-chill cast Al-Zn-Mg-Cu billets using cellular automaton-finite element method
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Min-Seok | - |
dc.contributor.author | Lee, Sang-Hwa | - |
dc.contributor.author | Jung, Jae-Gil | - |
dc.contributor.author | Eah, Kwangjun | - |
dc.date.accessioned | 2021-07-17T04:40:46Z | - |
dc.date.available | 2021-07-17T04:40:46Z | - |
dc.date.created | 2021-06-23 | - |
dc.date.issued | 2021-06 | - |
dc.identifier.issn | 1002-0071 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/gachon/handle/2020.sw.gachon/81696 | - |
dc.description.abstract | A cellular automaton-finite element (CA-FE) model was used to predict the solidification grain structure of permanent mold cast A7086 alloy. In this model, a Gaussian distribution of nucleation sites was adopted, and the Kurz-Giovanola-Trivedi model was extended to a multicomponent Al–Zn–Mg–Cu alloy system to determine the growth kinetics of the dendrite tip. For describing the Gaussian distribution of nucleation sites on the mold surface, an empirical relationship between the initial cooling rate of the melt and the nucleation density was proposed. Under various casting conditions, the calculated grain structures agreed well with the experimental results. Subsequently, the model was applied to the direct-chill (DC) cast billets, and the simulated grain structures reproduced well the experimental results. This confirmed that the current CA-FE model can be used practically and effectively in DC casting processes. © 2021 Chinese Materials Research Society | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE INC | - |
dc.relation.isPartOf | PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL | - |
dc.title | Prediction of grain structure in direct-chill cast Al-Zn-Mg-Cu billets using cellular automaton-finite element method | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.description.journalClass | 1 | - |
dc.identifier.wosid | 000669230900010 | - |
dc.identifier.doi | 10.1016/j.pnsc.2021.05.003 | - |
dc.identifier.bibliographicCitation | PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, v.31, no.3, pp.434 - 441 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.scopusid | 2-s2.0-85107957095 | - |
dc.citation.endPage | 441 | - |
dc.citation.startPage | 434 | - |
dc.citation.title | PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL | - |
dc.citation.volume | 31 | - |
dc.citation.number | 3 | - |
dc.contributor.affiliatedAuthor | Kim, Min-Seok | - |
dc.type.docType | Article in Press | - |
dc.subject.keywordAuthor | A7068 alloy | - |
dc.subject.keywordAuthor | Al–Zn–Mg–Cu alloy | - |
dc.subject.keywordAuthor | Cellular automaton-finite element (CA-FE) model | - |
dc.subject.keywordAuthor | Direct-chill casting | - |
dc.subject.keywordAuthor | Grain structure | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
1342, Seongnam-daero, Sujeong-gu, Seongnam-si, Gyeonggi-do, Republic of Korea(13120)031-750-5114
COPYRIGHT 2020 Gachon University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.