Setting shrinkage characteristics of methyl methacrylate-modified vinyl ester polymer concrete
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, K.-B. | - |
dc.contributor.author | Min, S.-H. | - |
dc.contributor.author | Yeon, K.-S. | - |
dc.date.available | 2020-02-28T03:43:57Z | - |
dc.date.created | 2020-02-12 | - |
dc.date.issued | 2016 | - |
dc.identifier.issn | 1546-9239 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/gachon/handle/2020.sw.gachon/8828 | - |
dc.description.abstract | This study evaluated the setting shrinkage characteristics of Methyl Methacrylate (MMA)-modified vinyl ester polymer concrete with different curing ages, MMA contents and curing temperatures. Results have shown that most of the setting shrinkage developed within 24 h after curing initiation. It was also found that an increase in MMA content led to an almost linear decrease in setting shrinkage, indicating that adding an MMA monomer was an effective measure to reduce the setting shrinkage of MMA-modified vinyl ester polymer concrete. A higher curing temperature tended to result in greater setting shrinkage, indicating that low-temperature curing is beneficial for reducing the setting shrinkage. The magnitude of setting shrinkage observed in vinyl ester polymer concrete was much greater than the drying shrinkage typically observed in ordinary Portland cement concrete but was smaller than the setting shrinkage of polymer concrete incorporating other types of binder. © 2016 Asad Freihat, Radwan Abu-Gdairi, Hammad Khalil, Eman Abuteen, Mohammed Al-Smadi and Rahmat Ali Khan. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Science Publications | - |
dc.relation.isPartOf | American Journal of Applied Sciences | - |
dc.title | Setting shrinkage characteristics of methyl methacrylate-modified vinyl ester polymer concrete | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.description.journalClass | 1 | - |
dc.identifier.doi | 10.3844/ajassp.2016.586.592 | - |
dc.identifier.bibliographicCitation | American Journal of Applied Sciences, v.13, no.5, pp.586 - 593 | - |
dc.identifier.scopusid | 2-s2.0-85011964887 | - |
dc.citation.endPage | 593 | - |
dc.citation.startPage | 586 | - |
dc.citation.title | American Journal of Applied Sciences | - |
dc.citation.volume | 13 | - |
dc.citation.number | 5 | - |
dc.contributor.affiliatedAuthor | Choi, K.-B. | - |
dc.type.docType | Article | - |
dc.subject.keywordAuthor | Curing temperature | - |
dc.subject.keywordAuthor | MMA | - |
dc.subject.keywordAuthor | MMA-modified vinyl ester | - |
dc.subject.keywordAuthor | Polymer concrete | - |
dc.subject.keywordAuthor | Setting shrinkage | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
1342, Seongnam-daero, Sujeong-gu, Seongnam-si, Gyeonggi-do, Republic of Korea(13120)031-750-5114
COPYRIGHT 2020 Gachon University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.