Solvent-assisted thermal annealing of disulfonated poly(arylene ether sulfone) random copolymers for low humidity polymer electrolyte membrane fuel cells
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Chang Hyun | - |
dc.contributor.author | Lee, Kwan-Soo | - |
dc.contributor.author | Lane, Ozma | - |
dc.contributor.author | McGrath, James E. | - |
dc.contributor.author | Chen, Ying | - |
dc.contributor.author | Wi, Sungsool | - |
dc.contributor.author | Lee, So Young | - |
dc.contributor.author | Lee, Young Moo | - |
dc.date.accessioned | 2022-02-03T01:37:53Z | - |
dc.date.available | 2022-02-03T01:37:53Z | - |
dc.date.created | 2021-05-11 | - |
dc.date.issued | 2012-02 | - |
dc.identifier.issn | 2046-2069 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/134021 | - |
dc.description.abstract | Fundamental studies of a new thermal annealing strategy for maximizing proton conductivity and single cell performance of glassy sulfonated hydrocarbon fuel cell membrane materials under both fully and partially hydrated conditions are reported. Directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers (BisA-XX, XX is the mole percent of hydrophilic moieties, XX = 20 to 40) with 2,2'-isopropylidene diphenol swivel ((CH3)(2)-C) units in their polymer backbone were cast from N,N-dimethylacetamide (DMAc) and dried under two different protocols; one set was dried at 60 degrees C (BisA-XX_60 degrees C), and the other at 150 degrees C under vacuum immediately after the initial drying (BisA-XX_150 degrees C). Small amounts of DMAc solvent remained during the second drying step which depressed the glass transition temperatures (T-g) of the BisA copolymers lower than 150 degrees C. BisA-XX_150 degrees C samples were essentially thermally annealed when dried at 150 degrees C. This increased the density of BisA copolymer chains; their T-g values were increased. Moreover, T-1 values of the protons in BisA-XX aromatic phenylene rings measured via solid-state NMR technique were lower as a result of the improved H-1-H-1 dipolar interaction. Interestingly, proton conductivity was improved after thermal annealing, possibly because the sulfonic acid density in the fully hydrated state (i.e., IECv(wet)) was enhanced. The synergistic effect of reduced water uptake and more developed hydrophilic-hydrophobic nanochannel formation may be important. The thermal annealing significantly influenced proton conductivity particularly at a low humidity (30 to 80% relative humidity (RH)). As a result, BisA-XX_150 degrees C samples derived from identical materials exhibited electrochemical polymer electrolyte membrane fuel cell (PEMFC) performances similar and superior to Nafion (R) 112 and BisA-XX_60 degrees C samples measured at 65% RH at 80 degrees C, respectively. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ROYAL SOC CHEMISTRY | - |
dc.title | Solvent-assisted thermal annealing of disulfonated poly(arylene ether sulfone) random copolymers for low humidity polymer electrolyte membrane fuel cells | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Young Moo | - |
dc.identifier.doi | 10.1039/c1ra00681a | - |
dc.identifier.scopusid | 2-s2.0-84859191317 | - |
dc.identifier.wosid | 000299177000041 | - |
dc.identifier.bibliographicCitation | RSC ADVANCES, v.2, no.3, pp.1025 - 1032 | - |
dc.relation.isPartOf | RSC ADVANCES | - |
dc.citation.title | RSC ADVANCES | - |
dc.citation.volume | 2 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 1025 | - |
dc.citation.endPage | 1032 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Multidisciplinary | - |
dc.subject.keywordPlus | PROTON-EXCHANGE MEMBRANE | - |
dc.subject.keywordPlus | HYDROPHOBIC MULTIBLOCK COPOLYMERS | - |
dc.subject.keywordPlus | SDCDPS MONOMER | - |
dc.subject.keywordPlus | CONDUCTIVITY | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | TRANSPORT | - |
dc.subject.keywordPlus | ACID | - |
dc.subject.keywordPlus | STABILITY | - |
dc.subject.keywordPlus | PEM | - |
dc.identifier.url | https://pubs.rsc.org/en/content/articlelanding/2012/RA/C1RA00681A | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.