Structural effects of 3D printing resolution on the gauge factor of microcrack-based strain gauges for health care monitoring
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Shin, Sanghun | - |
dc.contributor.author | Ko, Byeongjo | - |
dc.contributor.author | So, Hongyun | - |
dc.date.accessioned | 2022-07-06T10:37:07Z | - |
dc.date.available | 2022-07-06T10:37:07Z | - |
dc.date.created | 2022-03-07 | - |
dc.date.issued | 2022-01 | - |
dc.identifier.issn | 2055-7434 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/139766 | - |
dc.description.abstract | Measurements of physiological parameters such as pulse rate, voice, and motion for precise health care monitoring requires highly sensitive sensors. Flexible strain gauges are useful sensors that can be used in human health care devices. In this study, we propose a crack-based strain gauge fabricated by fused deposition modeling (FDM)-based three-dimensional (3D)-printing. The strain gauge combined a 3D-printed thermoplastic polyurethane layer and a platinum layer as the flexible substrate and conductive layer, respectively. Through a layer-by-layer deposition process, self-aligned crack arrays were easily formed along the groove patterns resulting from stress concentration during stretching motions. Strain gauges with a 200-pm printing thickness exhibited the most sensitive performance (similar to 442% increase in gauge factor compared with that of a flat sensor) and the fastest recovery time (similar to 99% decrease in recovery time compared with that of a flat sensor). In addition, 500 cycling tests were conducted to demonstrate the reliability of the sensor. Finally, various applications of the strain gauge as wearable devices used to monitor human health and motion were demonstrated. These results support the facile fabrication of sensitive strain gauges for the development of smart devices by additive manufacturing. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | SPRINGERNATURE | - |
dc.title | Structural effects of 3D printing resolution on the gauge factor of microcrack-based strain gauges for health care monitoring | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | So, Hongyun | - |
dc.identifier.doi | 10.1038/s41378-021-00347-x | - |
dc.identifier.scopusid | 2-s2.0-85123584786 | - |
dc.identifier.wosid | 000749191800001 | - |
dc.identifier.bibliographicCitation | MICROSYSTEMS & NANOENGINEERING, v.8, no.1, pp.1 - 10 | - |
dc.relation.isPartOf | MICROSYSTEMS & NANOENGINEERING | - |
dc.citation.title | MICROSYSTEMS & NANOENGINEERING | - |
dc.citation.volume | 8 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 1 | - |
dc.citation.endPage | 10 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalResearchArea | Instruments & Instrumentation | - |
dc.relation.journalWebOfScienceCategory | Nanoscience & Nanotechnology | - |
dc.relation.journalWebOfScienceCategory | Instruments & Instrumentation | - |
dc.subject.keywordPlus | SENSOR | - |
dc.subject.keywordPlus | FABRICATION | - |
dc.subject.keywordPlus | FILMS | - |
dc.identifier.url | https://www.nature.com/articles/s41378-021-00347-x | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.