Effect of graphene oxide on single fiber pullout behavior
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Chindaprasirt, Prinya | - |
dc.contributor.author | Sukontasukkul, Piti | - |
dc.contributor.author | Techaphatthanakon, Apisit | - |
dc.contributor.author | Kongtun, Suriyawan | - |
dc.contributor.author | Ruttanapun, Chesta | - |
dc.contributor.author | Yoo, Doo Yeol | - |
dc.contributor.author | Tangchirapat, Weerachart | - |
dc.contributor.author | Limkatanyu, Suchart | - |
dc.contributor.author | Banthia, Nemkumar | - |
dc.date.accessioned | 2022-07-06T22:38:55Z | - |
dc.date.available | 2022-07-06T22:38:55Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2021-04 | - |
dc.identifier.issn | 0950-0618 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/142125 | - |
dc.description.abstract | The properties of fiber reinforced concrete (FRC) depends strongly on bond between fiber and cement matrix. Any change in matrix and fiber characteristics affects the bond behavior. In this study, the effect of graphene oxide on cement composite strength and bond behavior between fiber and cement matrix was investigated. The graphene oxide solution with concentration of 10 mg/ml was mixed with cement mortar at 0.05% by weight of cement. Four types of fibers viz., hooked end steel, double hooked end steel, polypropylene and glass fibers were tested by embedding in both plain cement mortar (M) and cement graphene mortar (GM). The single fiber pullout test was performed at the rates of 60 and 180 mm/min. Results were collected in form of failure mode, scanning electron microscope (SEM) images, bond-slip response, bond strength and energy absorption. SEM images showed that the failure modes depended on fiber type, matrix type and loading rate. The steel fibers showed almost no damage except for the change of hooked end shape at the fiber end. For polypropylene fiber, the fiber surface scraping was commonly observed while the debonding of coating material was observed for glass fiber. The bond strength was higher in GM mortar than that of M mortar and increased with the increase in loading rate. In the case of fiber type, steel fibers exhibited higher bond and energy absorption than both polypropylene and glass fibers. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Elsevier Ltd | - |
dc.title | Effect of graphene oxide on single fiber pullout behavior | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yoo, Doo Yeol | - |
dc.identifier.doi | 10.1016/j.conbuildmat.2021.122539 | - |
dc.identifier.scopusid | 2-s2.0-85100687593 | - |
dc.identifier.wosid | 000634557500050 | - |
dc.identifier.bibliographicCitation | Construction and Building Materials, v.280, pp.1 - 13 | - |
dc.relation.isPartOf | Construction and Building Materials | - |
dc.citation.title | Construction and Building Materials | - |
dc.citation.volume | 280 | - |
dc.citation.startPage | 1 | - |
dc.citation.endPage | 13 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Construction & Building Technology | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Construction & Building Technology | - |
dc.relation.journalWebOfScienceCategory | Engineering, Civil | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | Bond strength (materials) | - |
dc.subject.keywordPlus | Cements | - |
dc.subject.keywordPlus | Energy absorption | - |
dc.subject.keywordPlus | Glass fibers | - |
dc.subject.keywordPlus | Graphene | - |
dc.subject.keywordPlus | Mortar | - |
dc.subject.keywordPlus | Polypropylenes | - |
dc.subject.keywordPlus | Scanning electron microscopy | - |
dc.subject.keywordPlus | Steel fibers | - |
dc.subject.keywordPlus | Cement composite | - |
dc.subject.keywordPlus | Cement mortars | - |
dc.subject.keywordPlus | Coating material | - |
dc.subject.keywordPlus | Fiber characteristics | - |
dc.subject.keywordPlus | Polypropylene fiber | - |
dc.subject.keywordPlus | Properties of fiber | - |
dc.subject.keywordPlus | Single fiber pull-out | - |
dc.subject.keywordPlus | Single-fiber pull-out test | - |
dc.subject.keywordPlus | Fiber reinforced concrete | - |
dc.subject.keywordAuthor | Bond-slip response | - |
dc.subject.keywordAuthor | Fiber pullout | - |
dc.subject.keywordAuthor | Glass fiber | - |
dc.subject.keywordAuthor | Graphene oxide | - |
dc.subject.keywordAuthor | Polypropylene fiber | - |
dc.subject.keywordAuthor | Steel fiber | - |
dc.identifier.url | https://www.sciencedirect.com/science/article/pii/S0950061821002993?via%3Dihub | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.