Optimal design and application of a piezoelectric energy harvesting system using multiple piezoelectric modules
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Moon, Jae Won | - |
dc.contributor.author | Jung, Hyun Jun | - |
dc.contributor.author | Baek, Ki Hwan | - |
dc.contributor.author | Song, Daniel | - |
dc.contributor.author | Kim, Se Bin | - |
dc.contributor.author | Kim, Jeong Hun | - |
dc.contributor.author | Sung, Tae Hyun | - |
dc.date.accessioned | 2022-07-07T13:35:10Z | - |
dc.date.available | 2022-07-07T13:35:10Z | - |
dc.date.created | 2021-05-12 | - |
dc.date.issued | 2014-06 | - |
dc.identifier.issn | 1385-3449 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/144650 | - |
dc.description.abstract | To enhance the output power of piezoelectric energy harvesting system up to the watt level, we designed a multi-piezoelectric array (MPA) energy harvesting system that can overcome the limitations of a single-piezoelectric harvesting systems. The MPA energy harvesting system was designed using an impact-type harvester utilizing a hitting stick, as such systems can generate higher output power than vibration-type methods using a cantilever in a single-piezoelectric energy harvesting system. We investigated the effects that various connection and rectification methods had on the output power of a piezoelectric energy harvesting system consisting of four 35 x45 x 0.2 mm(3) piezoelectric modules. We found that the output power was highest when each module was rectified before the modules were connected in parallel and that the optimal load resistance was inversely proportional to the number of modules if they were connected in parallel. To obtain watt-level power from the proposed MPA energy harvesting system, we designed a system consisting of 102 piezoelectric modules based on the derived optimized experimental conditions, from which we were able to obtain an output power of 1.99 W at 1800 hpm (hits per minute) and 500 Omega. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | SPRINGER | - |
dc.title | Optimal design and application of a piezoelectric energy harvesting system using multiple piezoelectric modules | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Sung, Tae Hyun | - |
dc.identifier.doi | 10.1007/s10832-014-9934-0 | - |
dc.identifier.scopusid | 2-s2.0-84905229340 | - |
dc.identifier.wosid | 000339721900020 | - |
dc.identifier.bibliographicCitation | JOURNAL OF ELECTROCERAMICS, v.32, no.4, pp.396 - 403 | - |
dc.relation.isPartOf | JOURNAL OF ELECTROCERAMICS | - |
dc.citation.title | JOURNAL OF ELECTROCERAMICS | - |
dc.citation.volume | 32 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 396 | - |
dc.citation.endPage | 403 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Ceramics | - |
dc.subject.keywordPlus | IMPACT ENERGY | - |
dc.subject.keywordPlus | GENERATOR | - |
dc.subject.keywordPlus | CIRCUIT | - |
dc.subject.keywordAuthor | Piezoelectric | - |
dc.subject.keywordAuthor | Energy harvesting | - |
dc.subject.keywordAuthor | Impedance matching | - |
dc.subject.keywordAuthor | Multi-piezoelectric array | - |
dc.identifier.url | https://link.springer.com/article/10.1007/s10832-014-9934-0 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.