Model development to predict mass transfer of particles onto a flat plate in parallel airflow
- Authors
- Kim, Won-Geun; Noh, Jung-Hun; Yook, Se-Jin
- Issue Date
- Jul-2015
- Publisher
- Avestia Publishing
- Citation
- Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, pp.1 - 2
- Indexed
- SCOPUS
- Journal Title
- Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
- Start Page
- 1
- End Page
- 2
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/156907
- ISSN
- 2369-8136
- Abstract
- Mass transfer of particles onto a wafer may result in the failure of the wafer in semiconductor manufacturing. The contamination control of particulate mass transfer is therefore of great importance to enhance the yield. In order to effectively reduce the particulate contamination of the wafers, it is needed to predict the level of the particulate contamination in clean room environments. The level of the particulate contamination of a critical surface can be assessed in terms of the deposition velocity, which means the number of particles deposited on the surface per unit time per unit surface area and per particle number concentration above the surface (Bae et al., 1995; Lee et al., 2014; Opiolka et al., 1994; Woo et
al., 2012). For example, with the consideration of the Brown diffusion and gravitational settling of particles, the deposition velocity can be predicted by summing the mean mass transfer coefficient and the settling velocity of particles (Liu and Ahn, 1987). However, in case when the particle motion is affected by an electric field and/or a thermophoretic force, the deposition velocity cannot be simply obtained. In this study, the Gaussian Diffusion Sphere Model (GDSM) suggested by Yook and Ahn (2009) was developed to estimate the deposition velocity of particles onto a flat surface, simulating a wafer, exposed to parallel airflow, by considering the effects of the Brownian diffusion, gravitational settling, and
electrical drift in an electric field, and thermophoretic drift of particles in a temperature gradient. The GDSM was validated by comparing the deposition velocity calculated by the GDSM with the deposition velocity predicted by simulating the flow field and particle trajectories. The GDSM was found to be accurate and fast in estimating the deposition velocity onto the flat plate in parallel airflow.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/156907)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.