Material and Bond Properties of Ultra High Performance Fiber Reinforced Concrete with Micro Steel Fibers
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yoo, Doo Yeol | - |
dc.contributor.author | Shin, Hyun-Oh | - |
dc.contributor.author | Yang, Jun-Mo | - |
dc.contributor.author | Yoon, Young-Soo | - |
dc.date.accessioned | 2022-07-16T05:31:26Z | - |
dc.date.available | 2022-07-16T05:31:26Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2014-03 | - |
dc.identifier.issn | 1359-8368 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/160379 | - |
dc.description.abstract | For investigating the effect of fiber content on the material and interfacial bond properties of ultra high performance fiber reinforced concrete (UHPFRC), four different volume ratios of micro steel fibers (V-f = 1%, 2%, 3%, and 4%) were used within an identical mortar matrix. Test results showed that 3% steel fiber by volume yielded the best performance in terms of compressive strength, elastic modulus, shrinkage behavior, and interfacial bond strength. These parameters improved as the fiber content was increased up to 3 vol.%. Flexural behaviors such as flexural strength, deflection, and crack mouth opening displacement at peak load had pseudo-linear relationships with the fiber content. Through inverse analysis, it was shown that fracture parameters including cohesive stress and fracture energy are significantly influenced by the fiber content: higher cohesive stress and fracture energy were achieved with higher fiber content. The analytical models for the ascending branch of bond stress-slip response suggested in the literature were considered for UHPFRC, and appropriate parameters were derived from the present test data. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.title | Material and Bond Properties of Ultra High Performance Fiber Reinforced Concrete with Micro Steel Fibers | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yoo, Doo Yeol | - |
dc.identifier.doi | 10.1016/j.compositesb.2013.10.081 | - |
dc.identifier.scopusid | 2-s2.0-84888241692 | - |
dc.identifier.wosid | 000330820900015 | - |
dc.identifier.bibliographicCitation | COMPOSITES PART B-ENGINEERING, v.58, pp.122 - 133 | - |
dc.relation.isPartOf | COMPOSITES PART B-ENGINEERING | - |
dc.citation.title | COMPOSITES PART B-ENGINEERING | - |
dc.citation.volume | 58 | - |
dc.citation.startPage | 122 | - |
dc.citation.endPage | 133 | - |
dc.type.rims | ART | - |
dc.type.docType | 정기학술지(Article(Perspective Article포함)) | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Engineering, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Composites | - |
dc.subject.keywordPlus | DRYING SHRINKAGE | - |
dc.subject.keywordPlus | FLEXURAL BEHAVIOR | - |
dc.subject.keywordPlus | SLIP | - |
dc.subject.keywordPlus | STRENGTH | - |
dc.subject.keywordPlus | TENSILE | - |
dc.subject.keywordPlus | BARS | - |
dc.subject.keywordAuthor | Fibers | - |
dc.subject.keywordAuthor | Fracture | - |
dc.subject.keywordAuthor | Analytical modeling Bond | - |
dc.identifier.url | https://www.sciencedirect.com/science/article/pii/S1359836813006562?via%3Dihub | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.