Nd-Fe-B permanent magnets fabricated by low temperature sintering process
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Jin Woo | - |
dc.contributor.author | Kim, Se Hoon | - |
dc.contributor.author | Song, Sun Yong | - |
dc.contributor.author | Kim, Young Do | - |
dc.date.accessioned | 2022-07-16T11:23:18Z | - |
dc.date.available | 2022-07-16T11:23:18Z | - |
dc.date.created | 2021-05-12 | - |
dc.date.issued | 2013-02 | - |
dc.identifier.issn | 0925-8388 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/163532 | - |
dc.description.abstract | Fabrication of 13Nd-2Dy-6B-bal. Fe (at.%) sintered magnets by low temperature sintering was demonstrated, focusing on grain size control. A magnet with a density higher than 99% was successfully obtained by sintering a Nd-Fe-B powder compact at 970 degrees C for 20 h. The average grain size of the magnet was 5.5 mu m, which was similar to that of the initial powder size (5 mu m). Compared with a conventionally sintered specimen (1070 degrees C/4 h), the coercivity of the magnet increased from 1672 kA/m to 1823 kA/m upon low temperature sintering. Consequently, the low temperature sintering process enabled us to suppress grain growth and to distribute the grains more uniformly, which resulted in improved magnetic properties, in particular improved intrinsic coercivity. The grain-size reduction through the low temperature sintering was explained by analyzing microstructures in relation to sintering behavior. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.title | Nd-Fe-B permanent magnets fabricated by low temperature sintering process | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Young Do | - |
dc.identifier.doi | 10.1016/j.jallcom.2012.10.058 | - |
dc.identifier.scopusid | 2-s2.0-84869884556 | - |
dc.identifier.wosid | 000313651600031 | - |
dc.identifier.bibliographicCitation | JOURNAL OF ALLOYS AND COMPOUNDS, v.551, pp.180 - 184 | - |
dc.relation.isPartOf | JOURNAL OF ALLOYS AND COMPOUNDS | - |
dc.citation.title | JOURNAL OF ALLOYS AND COMPOUNDS | - |
dc.citation.volume | 551 | - |
dc.citation.startPage | 180 | - |
dc.citation.endPage | 184 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Physical | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | COERCIVITY | - |
dc.subject.keywordAuthor | Rare earth magnet | - |
dc.subject.keywordAuthor | Low temperature sintering | - |
dc.subject.keywordAuthor | Coercivity | - |
dc.subject.keywordAuthor | Grain refinement | - |
dc.subject.keywordAuthor | Nd1.1Fe4B4(eta) phase | - |
dc.identifier.url | https://www.sciencedirect.com/science/article/pii/S0925838812018105?via%3Dihub | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.