Multi-response Taguchi robust design of back electromotive force and cogging torque considering the manufacturing tolerance for electric machine
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, K.-S. | - |
dc.contributor.author | Lee, S.-J. | - |
dc.contributor.author | Cho, S.-G. | - |
dc.contributor.author | Jang, J. | - |
dc.contributor.author | Lee, Tae Hee | - |
dc.contributor.author | Hong, J.-P. | - |
dc.contributor.author | Kim, S.-I. | - |
dc.date.accessioned | 2022-07-16T14:34:07Z | - |
dc.date.available | 2022-07-16T14:34:07Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2012-07 | - |
dc.identifier.issn | 1842-0133 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/165117 | - |
dc.description.abstract | This paper presents the Multi-response Taguchi robust design of back electromotive force (EMF) and cogging torque considering the manufacturing tolerances for electric machine. Control factors which affect the back EMF and cogging torque are chosen. The design using the Multi-response Taguchi method is performed in order to reduce the effect of variation of the noise factors caused by the manufacturing tolerances. In the Taguchi robust design, multi-response can not be considered. General Taguchi robust design is hard to employ. Therefore, Multi-response signal to noise (MRSN) ratio based on Taguchi robust design considering multiple responses is employed. Finally, the robust optimum combination of control factors is selected on the basis of the result used by Taguchi robust design based on MRSN. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.title | Multi-response Taguchi robust design of back electromotive force and cogging torque considering the manufacturing tolerance for electric machine | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Tae Hee | - |
dc.identifier.doi | 10.1109/OPTIM.2012.6231917 | - |
dc.identifier.scopusid | 2-s2.0-84864683722 | - |
dc.identifier.bibliographicCitation | Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM, pp.379 - 387 | - |
dc.relation.isPartOf | Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM | - |
dc.citation.title | Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM | - |
dc.citation.startPage | 379 | - |
dc.citation.endPage | 387 | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordPlus | Back electromotive force | - |
dc.subject.keywordPlus | Back-emf | - |
dc.subject.keywordPlus | Cogging torque | - |
dc.subject.keywordPlus | Control factors | - |
dc.subject.keywordPlus | Manufacturing tolerances | - |
dc.subject.keywordPlus | Multiple response | - |
dc.subject.keywordPlus | Multiresponse | - |
dc.subject.keywordPlus | Noise factor | - |
dc.subject.keywordPlus | Optimum combination | - |
dc.subject.keywordPlus | Signal to noise | - |
dc.subject.keywordPlus | Taguchi robust design | - |
dc.subject.keywordPlus | Electric machinery | - |
dc.subject.keywordPlus | Electromotive force | - |
dc.subject.keywordPlus | Manufacture | - |
dc.subject.keywordPlus | Optimization | - |
dc.subject.keywordPlus | Taguchi methods | - |
dc.subject.keywordPlus | Torque | - |
dc.identifier.url | https://ieeexplore.ieee.org/document/6231917 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.