Autogenous shrinkage of concrete with design strength 60–120 N/mm2
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yoo, Doo Yeol | - |
dc.contributor.author | Min, Kyung-Hwan | - |
dc.contributor.author | Lee, Joo-Ha | - |
dc.contributor.author | Yoon, Young-Soo | - |
dc.date.accessioned | 2022-07-16T18:35:49Z | - |
dc.date.available | 2022-07-16T18:35:49Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2011-10 | - |
dc.identifier.issn | 0024-9831 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/167383 | - |
dc.description.abstract | It is well known that autogenous shrinkage of high strength concrete (HSC) with a low water-to-binder ratio (W/B) is a major contributor to premature shrinkage cracking, which reduces the durability, strength and aesthetics of concrete structures. For concrete containing silica fume and having a low W/B, it is essential to accurately predict the autogenous shrinkage behaviour. In order to investigate the autogenous shrinkage behaviour of HSC, very high strength concrete (VHSC) and ultra high strength concrete (UHSC), five different W/B (0.3, 0.25, 0.2, 0.16 and 0.12) were studied in this work. To estimate the influence of admixtures on UHSC with W/B less than 0.2, fly ash (FA) and granulated blast-furnace slag (BFS) were added (0, 10, 20% and 0, 15, 30% by weight of total binder respectively). The experimental results and published data relevant to autogenous shrinkage were predicted using five different models for various grades of concrete. The test results showed that the largest amount of autogenous shrinkage was observed at W/B = 0.16, and additions of both of FA and BFS reduced autogenous shrinkage. The Eurocode 2 model and the Jonasson and Hedlund model substantially underestimated autogenous shrinkage of UHSC below W/B = 0.2, whereas the JSCE model and Dilger and Wang model overestimated the results for HSC and VHSC. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ICE PUBLISHING | - |
dc.title | Autogenous shrinkage of concrete with design strength 60–120 N/mm2 | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yoo, Doo Yeol | - |
dc.identifier.doi | 10.1680/macr.2011.63.10.751 | - |
dc.identifier.scopusid | 2-s2.0-80053537890 | - |
dc.identifier.wosid | 000295683900005 | - |
dc.identifier.bibliographicCitation | MAGAZINE OF CONCRETE RESEARCH, v.63, no.10, pp.751 - 761 | - |
dc.relation.isPartOf | MAGAZINE OF CONCRETE RESEARCH | - |
dc.citation.title | MAGAZINE OF CONCRETE RESEARCH | - |
dc.citation.volume | 63 | - |
dc.citation.number | 10 | - |
dc.citation.startPage | 751 | - |
dc.citation.endPage | 761 | - |
dc.type.rims | ART | - |
dc.type.docType | 정기학술지(Article(Perspective Article포함)) | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Construction & Building Technology | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Construction & Building Technology | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | SILICA FUME | - |
dc.subject.keywordPlus | FLY-ASH | - |
dc.subject.keywordPlus | PERFORMANCE | - |
dc.subject.keywordPlus | DEFORMATION | - |
dc.identifier.url | https://www.icevirtuallibrary.com/doi/10.1680/macr.2011.63.10.751 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.