Precipitation kinetics of secondary phases induced by heat accumulation in the deposit of Inconel 718
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jang, Junmyoung | - |
dc.contributor.author | Van, Donghyun | - |
dc.contributor.author | Lee, Seung Hwan | - |
dc.date.accessioned | 2022-07-19T04:49:36Z | - |
dc.date.available | 2022-07-19T04:49:36Z | - |
dc.date.created | 2022-06-03 | - |
dc.date.issued | 2022-07 | - |
dc.identifier.issn | 2214-8604 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/170037 | - |
dc.description.abstract | The precipitation kinetics were investigated of the secondary phases including γ'', γ', and δ phases formed by the heat accumulation produced in Inconel 718 (IN718) deposition of cold metal transfer (CMT)-based wire arc additive manufacturing (WAAM) process. Heat accumulation from the layer-by-layer deposition causes a difference in the holding time within the aging temperature range for each layer, resulting in a difference in precipitation of secondary phases that enhances hardness. In order to investigate the precipitation kinetics, which lead to establish the WAAM-related heat treatment standard specification unlike that of the wrought or cast IN718, the thermal history was measured during the deposition process and microstructural analysis was performed according to the height of the deposit. In addition, continuous cooling transformation (CCT) and time-temperature transformation (TTT) diagrams were prepared for dendritic and inter-dendritic regions at each height of the deposit. Based on the thermal measurements, the holding time within each precipitation temperature bands for the δ phase and for the strengthening phases were correlated with the ratio of δ phase fraction and hardness depending on the height, respectively. In addition, using the thermal history, Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation was applied to calculate the hardness of the IN718 deposit which was compared with the measured hardness depending on the holding time. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Elsevier B.V. | - |
dc.title | Precipitation kinetics of secondary phases induced by heat accumulation in the deposit of Inconel 718 | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Seung Hwan | - |
dc.identifier.doi | 10.1016/j.addma.2022.102831 | - |
dc.identifier.scopusid | 2-s2.0-85130078614 | - |
dc.identifier.wosid | 000806701500002 | - |
dc.identifier.bibliographicCitation | Additive Manufacturing, v.55, pp.1 - 13 | - |
dc.relation.isPartOf | Additive Manufacturing | - |
dc.citation.title | Additive Manufacturing | - |
dc.citation.volume | 55 | - |
dc.citation.startPage | 1 | - |
dc.citation.endPage | 13 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Engineering, Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | DIRECTED ENERGY DEPOSITION | - |
dc.subject.keywordPlus | DELTA-PHASE | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | SUPERALLOY | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordAuthor | Cold metal transfer | - |
dc.subject.keywordAuthor | Wire arc additive manufacturing | - |
dc.subject.keywordAuthor | Inconel 718 | - |
dc.subject.keywordAuthor | Precipitation hardening | - |
dc.subject.keywordAuthor | Phase transformation kinetics | - |
dc.identifier.url | https://www.sciencedirect.com/science/article/pii/S2214860422002305?via%3Dihub | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.