Prediction of disk friction loss of centrifugal compressor impeller disk for aircraft gas turbine engine
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Hyunyop | - |
dc.contributor.author | Cho, Leesang | - |
dc.contributor.author | Cho, Jinsoo | - |
dc.date.accessioned | 2022-12-20T15:46:51Z | - |
dc.date.available | 2022-12-20T15:46:51Z | - |
dc.date.created | 2022-09-16 | - |
dc.date.issued | 2010-09 | - |
dc.identifier.issn | 0000-0000 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/174126 | - |
dc.description.abstract | Using commercial CFD code (Fluent) analyzed disk friction loss for aircraft engine occur in the centrifugal compressor impeller disk. The disk friction loss is defined as the power loss due to skin friction and circulation of the fluid between the rotating disk and the stationary casing. In order to increase the efficiency of centrifugal compressor that will reduce the disk friction loss. In this study, disk friction loss due to changes the axial clearance between the impeller disk plane and casing and changes the surface roughness analyzed trend to occur and proposed the methods of reduction. For the rotating reference frame techniques were used for centrifugal compressor for steady-state analysis. The SRF (Single Rotating Reference Frame) mechanism for steady-state analysis techniques of the constant rotational motion is not used additional source or UDF (User Defined Function) and reducing computation time than Mixing plane or Sliding mesh technique and interpretation of the unsteady state. The results of CFD analysis were compared the Ali-Nemdili's empirical equation. The results of CFD analysis, the minimum result occurred when the axial clearance between the impeller disk plane and casing was 3. 5mm. A decrease of surface roughness also decreased the disk friction loss, but that had little effects. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Northwestern Polytechnical University | - |
dc.title | Prediction of disk friction loss of centrifugal compressor impeller disk for aircraft gas turbine engine | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Cho, Jinsoo | - |
dc.identifier.scopusid | 2-s2.0-84896263689 | - |
dc.identifier.bibliographicCitation | Proceedings of 2010 Asia-Pacific International Symposium on Aerospace Technology, APISAT 2010, pp.1028 - 1031 | - |
dc.relation.isPartOf | Proceedings of 2010 Asia-Pacific International Symposium on Aerospace Technology, APISAT 2010 | - |
dc.citation.title | Proceedings of 2010 Asia-Pacific International Symposium on Aerospace Technology, APISAT 2010 | - |
dc.citation.startPage | 1028 | - |
dc.citation.endPage | 1031 | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Axial clearance | - |
dc.subject.keywordAuthor | Centrifugal compressor | - |
dc.subject.keywordAuthor | Disk friction loss | - |
dc.subject.keywordAuthor | Impeller disk plane | - |
dc.subject.keywordAuthor | Surface roughness | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.