반응고 주조공정에서 평면도 증대를 위한 게이트시스템의 강건설계
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 송인호 | - |
dc.contributor.author | 정성종 | - |
dc.date.accessioned | 2022-12-20T22:32:01Z | - |
dc.date.available | 2022-12-20T22:32:01Z | - |
dc.date.created | 2022-09-19 | - |
dc.date.issued | 2009-04 | - |
dc.identifier.issn | 2508-5093 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/176922 | - |
dc.description.abstract | Semi-solid casting(SSC) of magnesium alloys is increasingly being used to produce high quality components. This process is similar to the injection molding of plastics and is called thixomolding. Using this process, higher strength, thinner wall sections and tighter tolerances without porosity are obtained. The high strength and low weight characteristics of magnesium alloys render the high-precision fabrication of thin-walled components with large surface areas. They are widely used for the IT, auto and consumer electronics industries. However, warpage of the thin-walled sections degrade quality of the parts produced in the SCC process. To produce thin-walled magnesium alloy parts, the geometry of gating system on the quality of the finished products should be clearly studied. In this paper, to minimize warpage of the thin-walled sections, Taguchi method is applied to the optimal design of the gate geometry in the thixomolding process. Width, height, length and angle of the gating system are selected for the robust design parameters. Effectiveness of the robust design is verified through the CAE software. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국생산제조학회 | - |
dc.title | 반응고 주조공정에서 평면도 증대를 위한 게이트시스템의 강건설계 | - |
dc.title.alternative | Robust Design of the Gate System for Flatness Improvement in Semi-Solid Casting Processes | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 정성종 | - |
dc.identifier.bibliographicCitation | 한국생산제조학회지, v.18, no.2, pp.130 - 136 | - |
dc.relation.isPartOf | 한국생산제조학회지 | - |
dc.citation.title | 한국생산제조학회지 | - |
dc.citation.volume | 18 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 130 | - |
dc.citation.endPage | 136 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001335816 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Gate System(게이트시스템) | - |
dc.subject.keywordAuthor | Mg Alloy(Mg합금) | - |
dc.subject.keywordAuthor | Robust Design(강건설계) | - |
dc.subject.keywordAuthor | Semi-Solid Casting(반응고주조) | - |
dc.subject.keywordAuthor | Taguchi Method(다꾸지법) | - |
dc.subject.keywordAuthor | Thixomolding(틱소몰딩) | - |
dc.subject.keywordAuthor | Warpage(휨) | - |
dc.identifier.url | https://scienceon.kisti.re.kr/srch/selectPORSrchArticle.do?cn=JAKO200916263467485&SITE=CLICK | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.