Damage resistance of SiC and Si3N4 coatings with control of microstructure and thickness

Abstract

We investigated the contact damage and indentation stress-strain behavior of silicon carbide (SiC) coatings and binary coatings consisting of SiC and silicon nitride (Si3N4), synthesized on graphite substrates with porosities of 10 and 13% by a solid-vapor reaction, in order to determine the coatings' damage resistance. The coating thickness was affected by the porosity of the substrate. The coatings on the substrate with 13% porosity showed a graded interface structure below the top dense layer. The SiC coatings were thicker than the SiC/Si3N4 composite coatings. The SiC coatings made the substrates hard, and SiC-coated substrates exhibited higher stress-strain curves than the substrates alone, but the SiC/Si3N4 composite coatings appeared unaffected. The coating thickness played an important role in limiting the effect of damage. The hardness values of the SiC coatings were higher than those of the substrates and the SiC/Si3N4 coatings. These corresponded well with the indentation stress-strain curves. The values of each coating showed saturated points depending on the applied load. This indicated that the substrate itself influenced the damage resistance of the coatings because of the layered structure of a harder coating with a softer substrate. The coatings enhanced contact damage and transmitted the damage to the substrates at a high load of P=2000 N. Both coatings showed an extensive subsurface damage, independent of the porosity of the substrate. In cyclic indentation tests. the contact diameters linearly increased with the number of cycles and depended on the porosity of the substrate, showing smaller contact diameters by coating the substrate.