Modeling the heterogeneous microstructures of Ti-base metal-matrix composites in the consolidation processes
- Authors
- Kim, Tae Won
- Issue Date
- Jul-2007
- Publisher
- ELSEVIER SCIENCE SA
- Keywords
- metal-matrix composites; microstructural evolution; densification behavior; recrystallization; grain growth
- Citation
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.462, no.1-2, pp.164 - 168
- Indexed
- SCIE
SCOPUS
- Journal Title
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Volume
- 462
- Number
- 1-2
- Start Page
- 164
- End Page
- 168
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/179911
- DOI
- 10.1016/j.msea.2006.04.148
- ISSN
- 0921-5093
- Abstract
- Densification in metal-matrix composites occurs by several mechanisms including plastic flow, diffusion, and power-law creep in the consolidation process. In addition, microstructural changes proceed inevitably by either recrystallization or grain growth due to the phase transformation under high temperature environment and stress concentration particularly around the fibers. Heterogeneous microstructures prior to and following consolidation have been analyzed, and the relations to densification behavior investigated. Increasing temperature or pressure leads to increasing densification rate but the non-uniform fiber distribution that is related to the heterogeneous microstructural evolution should be considered for an adequate modeling of microstructures. A material model coupled with the mechanisms-based heterogeneous microstructural evolution is then presented for consolidation. The model has been implemented into finite element software so that process simulation can be carried out, enabling the deformation behavior together with the level of densification to be compared with experimental data. Good comparisons are achieved.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.