XML을 이용한 이기종 CAD 조립체 DMU시스템의 설계
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정성종 | - |
dc.contributor.author | 송인호 | - |
dc.date.accessioned | 2022-12-21T07:30:49Z | - |
dc.date.available | 2022-12-21T07:30:49Z | - |
dc.date.created | 2022-09-19 | - |
dc.date.issued | 2007-06 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/179973 | - |
dc.description.abstract | As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesh, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 대한기계학회 | - |
dc.title | XML을 이용한 이기종 CAD 조립체 DMU시스템의 설계 | - |
dc.title.alternative | An XML-based Digital Mock-Up System for Heterogeneous Multi-CAD Assembly | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 정성종 | - |
dc.identifier.doi | 10.3795/KSME-A.2007.31.6.635 | - |
dc.identifier.scopusid | 2-s2.0-34250844438 | - |
dc.identifier.bibliographicCitation | 대한기계학회논문집 A, v.31, no.6, pp.635 - 643 | - |
dc.relation.isPartOf | 대한기계학회논문집 A | - |
dc.citation.title | 대한기계학회논문집 A | - |
dc.citation.volume | 31 | - |
dc.citation.number | 6 | - |
dc.citation.startPage | 635 | - |
dc.citation.endPage | 643 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001072344 | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Digital Mock-Up(디지털 목업) | - |
dc.subject.keywordAuthor | Lightweight CAD File(경량 캐드 파일) | - |
dc.subject.keywordAuthor | PDM(Product Data Management) | - |
dc.subject.keywordAuthor | STEP(Standard for the Exchange of Product Model Data) | - |
dc.subject.keywordAuthor | XML (eXtensible Mark-up Language) | - |
dc.identifier.url | https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE00839154&language=ko_KR&hasTopBanner=true | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.