유체동압베어링을 사용하는 하드디스크 드라이브 스핀들 시스템에서 발생하는 정전기 방전에 관한 실험적 연구Experimental Study on the Electrostatic Discharge in the HDD Spindle System Using Fluid Dynamic Bearings
- Other Titles
- Experimental Study on the Electrostatic Discharge in the HDD Spindle System Using Fluid Dynamic Bearings
- Authors
- 장건희; 강민구
- Issue Date
- Jan-2006
- Publisher
- 한국소음진동공학회
- Keywords
- HDD; 하드디스크 드라이브; FDB; 유체 동압 베어링; Break Down Voltage; 저항 파괴 전압; ESD; 정전기 방전; Giant Magneto-resistive Head; GMR헤드
- Citation
- 한국소음진동공학회논문집, v.16, no.1, pp.75 - 80
- Indexed
- KCI
- Journal Title
- 한국소음진동공학회논문집
- Volume
- 16
- Number
- 1
- Start Page
- 75
- End Page
- 80
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/181827
- ISSN
- 1598-2785
- Abstract
- This paper introduces the mechanism of the ESD(electrostatic discharge) in the HDD spindle system using FDBs(fluid dynamic bearings). When a HDD(hard disk drive) spindle system is rotating, triboelectric charging occurs in the FDBs through the friction between the lubricant and the rotating shaft or between the lubricant and stationary sleeve. And this electrostatic charge is accumulated in the rotating parts of the HDD spindle system because they are insulated from the ground by the lubricant. This research shows experimentally that the behavior of electric charge and discharge in the FDB spindle system is the same as that of a capacitor. It also measures the electrostatic voltage difference between the rotating and stationary parts in the FDB spindle system due to the change of humidity, supporting load and motor speed. This research shows that the control of ESD is required in the HDD spindle system using FDBs, because the electrostatic charge accumulated in the FDB spindle system may cause the breakdown damage of the GMR head and data loss consequently.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.