Shape memory polyurethanes crosslinked with castor oil-based multifunctional polyols

Abstract

As both the industry and academia become more focused on biomass-based smart materials, they are attracting a lot of attention. There has been a significant effort in the field of polyurethane (PU) synthesis to replace polyols used in synthesis with bio-derived polyols. Bio-derived polyols have limited application potential for bio-based PU due to their low functionality. Here, we reported castor oil (CO) based multifunctional polyols prepared by grafting thiols such as 1-mercaptoethanol or α–thioglycerol via a facile thiol-ene click reaction method (coded as COM and COT, respectively). Subsequently, bio-based shape memory polyurethanes (SMPU) crosslinked with prepared polyols were synthesized using a 2-step prepolymer method. By confirming the functionality of the synthesized polyols, it was determined that COT has an OH value of 380 mg KOH/g, which is approximately three times that of CO. The successful synthesis of SMPUs was confirmed through chemical structural analysis. It was also proved that the phase separation between the soft and hard segments was limited due to the increase in crosslinking density. As compared to SMPU crosslinked with CO, the mechanical strength of SMPU crosslinked with COT was improved by 80%, while the elongation was decreased by about 26%. As a result of shape memory behavior analysis, it was confirmed that the outstanding SMPU can be synthesized using CO-based multifunctional polyols.