Effect of Tin Addition on the Melting Temperatures and Mechanical Properties of Al-Si-Cu Brazing Filler Metals
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Min Sang | - |
dc.contributor.author | Park, Chun Woong | - |
dc.contributor.author | Byun, Jong Min | - |
dc.contributor.author | Kim, Young Do | - |
dc.date.accessioned | 2021-08-02T16:30:06Z | - |
dc.date.available | 2021-08-02T16:30:06Z | - |
dc.date.created | 2021-05-12 | - |
dc.date.issued | 2016-07 | - |
dc.identifier.issn | 1225-0562 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/22336 | - |
dc.description.abstract | For the development of a low-melting point filler metal for brazing aluminum alloy, we analyzed change of melting point and wettability with addition of Sn into Al-20Cu-10Si filler metal. DSC results showed that the addition of 5 wt% Sn into the Al-20Cu-10Si filler metal caused its liquidus temperature to decrease by about 30 degrees C. In the wettability test, spread area of melted Al-Cu-Si-Sn alloy is increased through the addition of Sn from 1 to 5 wt%. For the measuring of the mechanical properties of the joint region, Al 3003 plate is brazed by Al-20Cu-10Si-5Sn filler metal and the mechanical property is measured by tensile test. The results showed that the tensile strength of the joint region is higher than the tensile strength of Al 3003. Thus, failure occurred in the Al 3003 plate. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | MATERIALS RESEARCH SOC KOREA | - |
dc.title | Effect of Tin Addition on the Melting Temperatures and Mechanical Properties of Al-Si-Cu Brazing Filler Metals | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Young Do | - |
dc.identifier.doi | 10.3740/MRSK.2016.26.7.376 | - |
dc.identifier.scopusid | 2-s2.0-84988527550 | - |
dc.identifier.bibliographicCitation | KOREAN JOURNAL OF MATERIALS RESEARCH, v.26, no.7, pp.376 - 381 | - |
dc.relation.isPartOf | KOREAN JOURNAL OF MATERIALS RESEARCH | - |
dc.citation.title | KOREAN JOURNAL OF MATERIALS RESEARCH | - |
dc.citation.volume | 26 | - |
dc.citation.number | 7 | - |
dc.citation.startPage | 376 | - |
dc.citation.endPage | 381 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART002129538 | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | ALUMINUM-ALLOY | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | BRAZEABILITY | - |
dc.subject.keywordPlus | CORROSION | - |
dc.subject.keywordAuthor | brazing | - |
dc.subject.keywordAuthor | aluminum alloy | - |
dc.subject.keywordAuthor | bonding technology | - |
dc.subject.keywordAuthor | melting point | - |
dc.identifier.url | http://journal.mrs-k.or.kr/journal/article.php?code=43647 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.