커버 플레이트를 이용한 이종 3겹 저항 점 용접성 평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 심정현 | - |
dc.contributor.author | 이세헌 | - |
dc.date.accessioned | 2021-07-30T05:04:52Z | - |
dc.date.available | 2021-07-30T05:04:52Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2016-10 | - |
dc.identifier.issn | 2508-5093 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/2801 | - |
dc.description.abstract | Low carbon steel is usually used as the outer panel with low base metal resistance compared to the inner reinforced panel made with high strength steel, which makes it difficult to form a robust nugget. To overcome welding problems of a dissimilar three-sheet combination made of SGACEN, DP980 and CP1180, a cover plate was inserted between the upper electrode and SGACEN. The quality of the nugget was analyzed by comparing the welding signals and cross sectional images under maximum heat input both with and without the cover plate. To analyze the mechanical of weld properties, a hardness test analysis was conducted. To enhance the reliability of experimental results, temperature distributions were obtained using a simulation program. The method of inserting a cover plate led to a change in the heat input, which induced a larger nugget size between SGACEN and DP980. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국생산제조학회 | - |
dc.title | 커버 플레이트를 이용한 이종 3겹 저항 점 용접성 평가 | - |
dc.title.alternative | Characteristics of Dissimillar Three-Sheet Resistance Spot Welding for Advanced High Strength Steel with Cover Plate | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 이세헌 | - |
dc.identifier.doi | 10.7735/ksmte.2016.25.5.373 | - |
dc.identifier.bibliographicCitation | 한국생산제조학회지, v.25, no.5, pp.373 - 379 | - |
dc.relation.isPartOf | 한국생산제조학회지 | - |
dc.citation.title | 한국생산제조학회지 | - |
dc.citation.volume | 25 | - |
dc.citation.number | 5 | - |
dc.citation.startPage | 373 | - |
dc.citation.endPage | 379 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002156684 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Three-sheet metal | - |
dc.subject.keywordAuthor | Resistance spot welding | - |
dc.subject.keywordAuthor | Cover plate | - |
dc.subject.keywordAuthor | Dynamic resistance | - |
dc.subject.keywordAuthor | SORPAS | - |
dc.identifier.url | https://www.kci.go.kr/kciportal/landing/article.kci?arti_id=ART002168292 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.