PANI//MoO3 Fiber-shaped Asymmetric Supercapacitors with Roll-type Configuration
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yu, Seongil | - |
dc.contributor.author | Patil, Bebi | - |
dc.contributor.author | Ahn, Heejoon | - |
dc.date.accessioned | 2021-07-30T05:09:47Z | - |
dc.date.available | 2021-07-30T05:09:47Z | - |
dc.date.created | 2021-05-11 | - |
dc.date.issued | 2020-03 | - |
dc.identifier.issn | 1229-9197 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/3263 | - |
dc.description.abstract | An asymmetric fiber-shaped supercapacitor (FSC) with roll-type configuration, displaying high power and energy density characteristics, has been fabricated for energy storage in wearable devices. The positive and negative electrodes of the asymmetric FSC consist of polyaniline (PANI) and MoO3, respectively, and are deposited on a carbon fiber (CF) substrate using a chemical bath deposition method. A polyvinyl alcohol/H2SO4 gel is used as electrolyte, which also maintains the CF electrodes in fiber form. The asymmetric PANI//MoO3 roll-type FSC exhibits a wider potential range than its symmetric PANI//PANI counterpart, resulting in higher energy and power densities. The asymmetric PANI//MoO3 roll-type FSC shows an energy density of 67.51 mu Wh/cm(3) with a power density of 59.71 mW/cm(3) at a current of 10 mA, which is more than twice the energy density of symmetric PANI//PANI roll-type FSC (30.42 mu Wh/cm(3) and 25.12 mW/cm(3)). | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | KOREAN FIBER SOC | - |
dc.title | PANI//MoO3 Fiber-shaped Asymmetric Supercapacitors with Roll-type Configuration | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Ahn, Heejoon | - |
dc.identifier.doi | 10.1007/s12221-020-9811-1 | - |
dc.identifier.scopusid | 2-s2.0-85082066083 | - |
dc.identifier.wosid | 000520967000003 | - |
dc.identifier.bibliographicCitation | FIBERS AND POLYMERS, v.21, no.3, pp.465 - 472 | - |
dc.relation.isPartOf | FIBERS AND POLYMERS | - |
dc.citation.title | FIBERS AND POLYMERS | - |
dc.citation.volume | 21 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 465 | - |
dc.citation.endPage | 472 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART002568342 | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Polymer Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Textiles | - |
dc.relation.journalWebOfScienceCategory | Polymer Science | - |
dc.subject.keywordPlus | SOLID-STATE | - |
dc.subject.keywordPlus | THIN-FILM | - |
dc.subject.keywordPlus | LOW-COST | - |
dc.subject.keywordPlus | NANOTUBES | - |
dc.subject.keywordPlus | OXIDE | - |
dc.subject.keywordPlus | ELECTRODES | - |
dc.subject.keywordAuthor | Polyaniline | - |
dc.subject.keywordAuthor | MoO3 | - |
dc.subject.keywordAuthor | Carbon fiber | - |
dc.subject.keywordAuthor | Fiber-shaped supercapacitor | - |
dc.subject.keywordAuthor | Wearable device | - |
dc.identifier.url | https://link.springer.com/article/10.1007/s12221-020-9811-1 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.