Improved safety injection flow map associated with target RCS depressurization to maintain core coolability of OPR1000
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jeon, Joongoo | - |
dc.contributor.author | Choi, Wonjun | - |
dc.contributor.author | Choi, Wonjun | - |
dc.date.accessioned | 2021-07-30T05:12:13Z | - |
dc.date.available | 2021-07-30T05:12:13Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2017-06 | - |
dc.identifier.issn | 0003-018X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/3531 | - |
dc.description.abstract | n Korea, Severe Accident Management Guidance (SAMG) for Optimized Power Reactor (OPR1000) has been developed through the research results related to the WOG SAMG, in which the operation phase shifts from the Emergency Operation Procedure (EOP) to the SAMG when the Core Exit Temperature (CET) reaches 923 K. Among 7 mitigation strategies envisioned, the third management strategy, injecting coolant into Reactor Coolant System (RCS) by depressurizing the RCS is one of the key strategies to fortify the in-vessel retention capability. As an aid to such mitigation strategy, a safety injection (SI) flow map has been developed by Lee et al. for predicting required flow rate associated with target RCS depressurization to recover in-vessel coolability. The mechanistic SI flow map used the CET increase rate and core water level decrease rate obtained from MELCOR code simulation. It should be noted that during the severe accident, the total heat generated is sum of the decay heat and the oxidation heat. Thus, it is necessary to consider additional heat sources by oxidation reaction between cladding, structure, control rod, and hot steam prior to the injection of coolant. It was believed that the SI model estimated required flow rate rather conservatively by considering the expected amount decay heat and the accumulated heat in the core based on the RCS pressure. However, it was confirmed that the SI model developed by Lee et al. could not represent the total heat removal especially since start of oxidation. Under transient conditions, the heat sources accumulated in the heat structures (fuel, cladding, supporting structures) should be embarked in the model for accurate contribution of the total heat source to the required flow rate. Therefore, the objective of this study is to improve the previous SI flow map predicting the injection flow rate associated with target RCS depressurization to satisfy the in-vessel coolability during severe accidents. Additional terms were developed to reflect accurate heat accumulating and included in the existing model. Resulting SI flow map includes the target RCS depressurization, which enables discharge of the required flow rate by utilizing the flow rate-pressure curve with operation of two high pressure safety injections (HPSIs). Also recent MELCOR simulation result of a postulated steam generator tube rupture (SGTR) accident verified the accuracy of the improved map | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | American Nuclear Society | - |
dc.title | Improved safety injection flow map associated with target RCS depressurization to maintain core coolability of OPR1000 | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Choi, Wonjun | - |
dc.identifier.scopusid | 2-s2.0-85033435765 | - |
dc.identifier.bibliographicCitation | Transactions of the American Nuclear Society, v.116, pp.1461 - 1463 | - |
dc.relation.isPartOf | Transactions of the American Nuclear Society | - |
dc.citation.title | Transactions of the American Nuclear Society | - |
dc.citation.volume | 116 | - |
dc.citation.startPage | 1461 | - |
dc.citation.endPage | 1463 | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.identifier.url | https://inis.iaea.org/search/searchsinglerecord.aspx?recordsFor=SingleRecord&RN=52090801 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.