The role of ballast specific gravity and velocity gradient in ballasted flocculation

Abstract

This study investigated the concealed interaction between applied velocity gradient (G value) and ballast specific gravity (SG) in ballasted flocculation (BF). The objective was to unravel the participation of applied surface concentration (SC: 0.005 m(2) L-1 -0.02 m(2) L-1) of high specific gravity ballasts (SG: 2.9-5.57) in BF aggregation phenomenon at varied velocity gradients (G value: 750s(-1) -1250s(-1)). Static mixer was used to perform the BF experiments, and aggregated flocs were characterized using charge coupled device (CCD) camera. The results revealed that conventionally adopted velocity gradient (G value: 150s(-1) 300s(-1)) in BF studies was insufficient for efficient floc development due to inadequate suspension of denser ballasts during mixing. This resulted poor turbidity removal (< 40 %) and immature slow settling flocs (< 25 mh(-1)) despite higher ballast consumption. However, appropriate optimization of G value (1250s(-1)) corresponding to high specific gravity ballast (SG: 5.57) resulted in 99.5 % turbidity removal (residual turbidity: 1NTU) achieved in a shorter settling interval of 30 s consuming significantly less ballast concentration. This expeditious settling phenomenon was also evident in CCD camera observations of the ballasted flocs achieving superficial settling velocity (105 mh(-1)). Therefore, it was concluded that appropriate optimization of the G value corresponding to the pertinent concentration of denser ballasts can exhibit rapid elimination of micropollutants, and superficial sedimentation with efficient material and energy use. This can lead to efficient BF design with a short HRT, compact footprint, and ability to handle highly turbid influent.