A feasibility study of wood-plastic composite paver block for basic rest areas
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yang, Sungchul | - |
dc.contributor.author | S. | - |
dc.date.available | 2021-03-17T07:59:37Z | - |
dc.date.created | 2021-02-26 | - |
dc.date.issued | 2019 | - |
dc.identifier.issn | 1017-0715 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/12728 | - |
dc.description.abstract | A wood-plastic composite (WPC) paver block was manufactured using wood chips waste through an extrusion process, and it was intended to be used for paving in basic rest areas. The first stage in this study covered preliminary tests in terms of flexural strength and dimensional swelling to determine the optimal WPC compounding mix condition, by variation of the WPC ingredients. Next, three different paver blocks including the WPC block, a non-porous cement block, and a porous cement block were tested in terms of various material properties in the laboratory. Finally, two outdoor test sections of the proposed paver blocks were prepared to simulate a basic rest area. Test results indicated that the flexural strength of the WPC paver blocks was about 1.6 times greater than that of the tested cement paver blocks. The WPC block pavement was unaffected by water buoyance as well as volume expansion due to swelling. Results from the impact absorbance test and light falling weight deflectometer (LFWD) test clearly showed that the WPC block paving system marginally satisfied the comfortable and safe hardness range from the pedestrians’ perspective, while the results demonstrated that it is structurally sound for application as a road paving block. © 2019, Korean Society of Wood Science Technology. All rights resvered. | - |
dc.publisher | Korean Society of Wood Science Technology | - |
dc.title | A feasibility study of wood-plastic composite paver block for basic rest areas | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Yang, Sungchul | - |
dc.identifier.doi | 10.5658/WOOD.2019.47.1.51 | - |
dc.identifier.scopusid | 2-s2.0-85061092989 | - |
dc.identifier.bibliographicCitation | Journal of the Korean Wood Science and Technology, v.47, no.1, pp.51 - 65 | - |
dc.relation.isPartOf | Journal of the Korean Wood Science and Technology | - |
dc.citation.title | Journal of the Korean Wood Science and Technology | - |
dc.citation.volume | 47 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 51 | - |
dc.citation.endPage | 65 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Block paver | - |
dc.subject.keywordAuthor | Hardness | - |
dc.subject.keywordAuthor | Impact absorbance | - |
dc.subject.keywordAuthor | Recycled resources | - |
dc.subject.keywordAuthor | Wood plastic composite | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.