Preparation of ��Ready-Made STL (RMS)�� for build assurance in additive metal manufacturing (AMM): A review
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jee, Haeseong | - |
dc.contributor.author | H. | - |
dc.date.available | 2021-03-17T08:01:48Z | - |
dc.date.created | 2021-02-26 | - |
dc.date.issued | 2019 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/12834 | - |
dc.description.abstract | In this paper “Ready-Made STL (RMS)” is defined as an STL model sophisticatedly planned and managed in advance in order to provide with all information needed for the build using an additive manufacturing process. Generating “RMS” from a raw STL model for build preparation typically undergoes three main processes for full optimization; diagnosis & repair of model geometry for geometric integrity and validity, modification of designed features for design compatibility, and specification of process parameters tight enough for process feasibility. In addition, as a subsidiary process for aid quality verification before the build, visualization of part build geometry simulated with surface roughness or build layers can also help full assurance of the build. This paper provides an executive review of previous approaches preparing “RMS” models and briefly addresses crucial issues resolved by corresponding approaches for build assurance in additive metal manufacturing as quick, efficient, and zero-fault printing process. © 2019, KSME & Springer. | - |
dc.publisher | Korean Society of Mechanical Engineers | - |
dc.title | Preparation of ��Ready-Made STL (RMS)�� for build assurance in additive metal manufacturing (AMM): A review | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Jee, Haeseong | - |
dc.identifier.doi | 10.1007/s12206-019-1106-3 | - |
dc.identifier.scopusid | 2-s2.0-85077142434 | - |
dc.identifier.bibliographicCitation | Journal of Mechanical Science and Technology, v.33, no.12, pp.5643 - 5652 | - |
dc.relation.isPartOf | Journal of Mechanical Science and Technology | - |
dc.citation.title | Journal of Mechanical Science and Technology | - |
dc.citation.volume | 33 | - |
dc.citation.number | 12 | - |
dc.citation.startPage | 5643 | - |
dc.citation.endPage | 5652 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Additive metal manufacturing | - |
dc.subject.keywordAuthor | Build assurance | - |
dc.subject.keywordAuthor | Model repair | - |
dc.subject.keywordAuthor | Ready-made STL (RMS) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.