Numerical analysis of horizontal twin-roll casting for mg-az31
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, Jong-jin | - |
dc.contributor.author | J.J. | - |
dc.date.available | 2021-03-17T08:42:34Z | - |
dc.date.created | 2021-02-26 | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 0255-5476 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/13017 | - |
dc.description.abstract | Molten Mg-AZ31 cools and solidifies to a sheet in horizontal twin-roll casting. In the present investigation, this process was numerically analyzed in two dimensions under various conditions. Steady-state solutions were obtained including plastic deformation after solidification. Based on results of the analyses, an optimum process schedule was proposed for production of a sheet of 1 mm in thickness where the sheet thickness decreased from 3 mm through a couple of transitions during operation. However, the schedule was recommended up to 2 mm in thickness due to the restriction in strength of the sleeve material. | - |
dc.publisher | TRANS TECH PUBLICATIONS LTD | - |
dc.title | Numerical analysis of horizontal twin-roll casting for mg-az31 | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, Jong-jin | - |
dc.identifier.doi | 10.4028/www.scientific.net/MSF.941.1354 | - |
dc.identifier.scopusid | 2-s2.0-85064086896 | - |
dc.identifier.wosid | 000468152500224 | - |
dc.identifier.bibliographicCitation | Materials Science Forum, v.941 MSF, pp.1354 - 1359 | - |
dc.relation.isPartOf | Materials Science Forum | - |
dc.citation.title | Materials Science Forum | - |
dc.citation.volume | 941 MSF | - |
dc.citation.startPage | 1354 | - |
dc.citation.endPage | 1359 | - |
dc.type.rims | ART | - |
dc.type.docType | Proceedings Paper | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | CASTER | - |
dc.subject.keywordPlus | ALLOY | - |
dc.subject.keywordPlus | FLOW | - |
dc.subject.keywordAuthor | twin roll casting | - |
dc.subject.keywordAuthor | magnesium alloy | - |
dc.subject.keywordAuthor | sheet | - |
dc.subject.keywordAuthor | numerical analysis | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.