사출성형기를 위한 토글 메카니즘의 기구학적 모델링 및 해석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조승호 | - |
dc.contributor.author | 전윤선 | - |
dc.contributor.author | 김영신 | - |
dc.contributor.author | 박경하 | - |
dc.date.accessioned | 2021-11-11T07:40:23Z | - |
dc.date.available | 2021-11-11T07:40:23Z | - |
dc.date.created | 2021-11-10 | - |
dc.date.issued | 2013 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/18002 | - |
dc.description.abstract | This paper deals with the issue of kinematic modeling and analysis of a toggle mechanism. Based on the mathematic model of a conventional five-point type toggle mechanism. New five-point type toggle mechanism has been analyzed by computer simulation method. A sensitivity ratio has been defined and analyzed to compare its performance with four-point type toggle mechanism. A cycloidal motion has been applied to the cross head as an input and the motion of the moving platen is considered as an output. The effect of link design parameter as well as the type of toggle has been investigated by computer simulation to be available for industrial applications of injection molding machines. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 사출성형기를 위한 토글 메카니즘의 기구학적 모델링 및 해석 | - |
dc.title.alternative | Kinematic Modeling and Analysis of a Toggle Mechanism for Injection Molding Machines | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 조승호 | - |
dc.identifier.doi | 10.7736/KSPE.2013.30.2.216 | - |
dc.identifier.bibliographicCitation | 한국정밀공학회지, v.30, no.2, pp.216 - 222 | - |
dc.relation.isPartOf | 한국정밀공학회지 | - |
dc.citation.title | 한국정밀공학회지 | - |
dc.citation.volume | 30 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 216 | - |
dc.citation.endPage | 222 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001739081 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Injection Molding Machines (사출성형기) | - |
dc.subject.keywordAuthor | Toggle Mechanism (토글 메카니즘) | - |
dc.subject.keywordAuthor | Kinematic Modeling (기구학적모델링) | - |
dc.subject.keywordAuthor | Sensitivity Analysis (민감도 해석) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.