2개의 볼트를 가지는 PFRP 볼트연결부의 볼트배치에 따른 강도평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이영근 | - |
dc.contributor.author | 김선희 | - |
dc.contributor.author | 원용석 | - |
dc.contributor.author | 전진욱 | - |
dc.contributor.author | 신광열 | - |
dc.contributor.author | 윤순종 | - |
dc.date.accessioned | 2021-11-25T03:42:38Z | - |
dc.date.available | 2021-11-25T03:42:38Z | - |
dc.date.created | 2021-11-23 | - |
dc.date.issued | 2014 | - |
dc.identifier.issn | 2093-5145 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/18372 | - |
dc.description.abstract | Fiber reinforced plastic (FRP) structural shapes are readily available in civil engineering applications. Among many manufacturing techniques used for FRP structural shapes, pultrusion process is one of the most widely used techniques in civil engineering applications. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric plastic structural shapes with constant cross-section. Pultruded composites are attractive for structural applications because of their continuous mass production with excellent mechanical properties. This paper presents the results of investigations pertaining to the bolted connection with two bolts for the pultrudedFRP (PFRP) structural members. PFRP bolted connection tests were conducted with end distance to bolt diameter ratio (e 1 /d b ) and two types of bolt pattern such as horizontal (Pattern A) and vertical arrangement (Pattern B). As a result, it is found that the e 1 /d b is recommended as the ratio of 4. In addition, it is also found that the bearing strengths at failure of the Pattern A and Pattern B have a similar value. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국복합신소재구조학회 | - |
dc.title | 2개의 볼트를 가지는 PFRP 볼트연결부의 볼트배치에 따른 강도평가 | - |
dc.title.alternative | Strength Evaluation of Bolt Arrangement in PFRP Bolted Connection with 2 Bolts | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 이영근 | - |
dc.contributor.affiliatedAuthor | 신광열 | - |
dc.contributor.affiliatedAuthor | 윤순종 | - |
dc.identifier.doi | 10.11004/kosacs.2014.5.3.017 | - |
dc.identifier.bibliographicCitation | 한국복합신소재구조학회 논문집, v.5, no.3, pp.17 - 22 | - |
dc.relation.isPartOf | 한국복합신소재구조학회 논문집 | - |
dc.citation.title | 한국복합신소재구조학회 논문집 | - |
dc.citation.volume | 5 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 17 | - |
dc.citation.endPage | 22 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001935940 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.description.journalRegisteredClass | other | - |
dc.subject.keywordAuthor | PFRP | - |
dc.subject.keywordAuthor | 하중저항계수설계 | - |
dc.subject.keywordAuthor | 국부좌굴 | - |
dc.subject.keywordAuthor | 실험 | - |
dc.subject.keywordAuthor | 정밀해법 | - |
dc.subject.keywordAuthor | Pultruded FRP | - |
dc.subject.keywordAuthor | Bolted connection | - |
dc.subject.keywordAuthor | Arrangement | - |
dc.subject.keywordAuthor | Experiment | - |
dc.subject.keywordAuthor | Strength | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.