Numerical analysis on the sliding failure of suction pile
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, M. | - |
dc.contributor.author | Lee, I. | - |
dc.contributor.author | Kim, H.T. | - |
dc.contributor.author | Youn, H. | - |
dc.contributor.author | Jang, I.-S. | - |
dc.date.accessioned | 2021-12-02T04:44:59Z | - |
dc.date.available | 2021-12-02T04:44:59Z | - |
dc.date.created | 2021-11-30 | - |
dc.date.issued | 2012 | - |
dc.identifier.issn | 1098-6189 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/19074 | - |
dc.description.abstract | This paper presents the pullout behavior of suction pile using finite difference method; and the commercial software, FLAC3D, was employed for the numerical analyses. The conventional equation for predicting ultimate pullout capacity for sliding failure was compared with the numerical analysis results. The pile diameter, pile length, and the undrained shear strength of the clay were varied to investigate the effect of the parameters. Based on 3-D analyses of total 32cases, it was concluded that the conventional equation for sliding failure could be adopted reasonably if the interface coefficient is reasonably provided. The interface coefficients were found to vary depending on the undrained shear strength, pile length-diameter ratio. This paper presents interface coefficients which could be used to the internal and external side friction of suction pile. Copyright © 2012 by the International Society of Offshore and Polar Engineers (ISOPE). | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.title | Numerical analysis on the sliding failure of suction pile | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Youn, H. | - |
dc.identifier.scopusid | 2-s2.0-84866119094 | - |
dc.identifier.bibliographicCitation | Proceedings of the International Offshore and Polar Engineering Conference, pp.646 - 649 | - |
dc.relation.isPartOf | Proceedings of the International Offshore and Polar Engineering Conference | - |
dc.citation.title | Proceedings of the International Offshore and Polar Engineering Conference | - |
dc.citation.startPage | 646 | - |
dc.citation.endPage | 649 | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordAuthor | Finite difference method | - |
dc.subject.keywordAuthor | Pullout capacity | - |
dc.subject.keywordAuthor | Sliding failure | - |
dc.subject.keywordAuthor | Suction pile | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.