Gas atomization으로 제조된 Ti_50Ni_30Cu_20 합금 분말의 상변태 거동
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김연욱 | - |
dc.contributor.author | 정영수 | - |
dc.contributor.author | 최은수 | - |
dc.contributor.author | 남태현 | - |
dc.contributor.author | 임연민 | - |
dc.date.accessioned | 2021-12-15T04:42:39Z | - |
dc.date.available | 2021-12-15T04:42:39Z | - |
dc.date.created | 2021-12-10 | - |
dc.date.issued | 2011 | - |
dc.identifier.issn | 1598-706X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/20485 | - |
dc.description.abstract | For the fabrication of bulk near-net-shape Ti-Ni-Cu shape memory alloys, consolidation of Ti-Ni-Cu alloy powders are useful because of their brittle property. In the present study, Ti_50Ni_30Cu_20 shape memory alloy powders were prepared by gas atomization and martensitic transformation temperatures and microstructures of those powders were investigated as a function of powder size. The size distribution of the powders was measured by conventional sieving, and sieved powders with the specific size range of 25 to 150 μm were chosen for this examination. XRD analysis showed that the B2-B19 martensitic transformation occurred in the powders. In DSC curves of the as-atomized Ti_50Ni_30Cu_20 powders as a function of powder size, only one clear peak was found on each cooling and heating curve. The martensitic transformation start temperature(M_s) of the 25-50 μm powders was 31.5℃. The M_s increased with increasing powder size and the difference of M_s between 25-50 μm powders and 100-150 μm powders is only 1℃. The typical microstructure of the rapidly solidified powders showed cellular morphology and very small pores were observed in intercellular regions. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국주조공학회 | - |
dc.title | Gas atomization으로 제조된 Ti_50Ni_30Cu_20 합금 분말의 상변태 거동 | - |
dc.title.alternative | Martensitic Transformation Behaviors of Gas Atomized Ti_50Ni_30Cu_20 Powders | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 최은수 | - |
dc.identifier.bibliographicCitation | 한국주조공학회지, v.31, no.1, pp.26 - 30 | - |
dc.relation.isPartOf | 한국주조공학회지 | - |
dc.citation.title | 한국주조공학회지 | - |
dc.citation.volume | 31 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 26 | - |
dc.citation.endPage | 30 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001534122 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Ti-Ni-Cu shape memory alloy | - |
dc.subject.keywordAuthor | Gas atomization | - |
dc.subject.keywordAuthor | Rapidly solidified powder | - |
dc.subject.keywordAuthor | Martensitic transformation | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.