Formability of magnesium AZ31 sheet in the incremental forming at warm temperature
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ji, Y. H. | - |
dc.contributor.author | Park, J. J. | - |
dc.date.accessioned | 2022-01-13T06:43:25Z | - |
dc.date.available | 2022-01-13T06:43:25Z | - |
dc.date.created | 2022-01-04 | - |
dc.date.issued | 2008-05-26 | - |
dc.identifier.issn | 0924-0136 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/22733 | - |
dc.description.abstract | In the present study, it was attempted to apply the incremental forming method to magnesium sheets at warm temperature in order to fully utilize the formability of the material. To assess the influence of temperature to the forming limit, plane-strain as well as axisym-metric stretching tests were performed at 20 degrees C, 100 degrees C, 150 degrees C, 200 degrees C and 250 degrees C. Cones with different inclination angles were designed based on the forming limits at these temperatures, and formed incrementally. FEM analysis was used to understand the deformation characteristics observed in the experiment. A circular cup with an inclination angle that exceeds the forming limit was successfully formed by introducing the concept of the progressive forming to the incremental forming. (C) 2008 Published by Elsevier B.V. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.subject | ALLOY SHEETS | - |
dc.title | Formability of magnesium AZ31 sheet in the incremental forming at warm temperature | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, J. J. | - |
dc.identifier.doi | 10.1016/j.jmatprotec.2007.11.206 | - |
dc.identifier.scopusid | 2-s2.0-41549134449 | - |
dc.identifier.wosid | 000255737600066 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.354 - 358 | - |
dc.relation.isPartOf | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | - |
dc.citation.title | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | - |
dc.citation.volume | 201 | - |
dc.citation.number | 1-3 | - |
dc.citation.startPage | 354 | - |
dc.citation.endPage | 358 | - |
dc.type.rims | ART | - |
dc.type.docType | Article; Proceedings Paper | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Engineering, Industrial | - |
dc.relation.journalWebOfScienceCategory | Engineering, Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | ALLOY SHEETS | - |
dc.subject.keywordAuthor | magnesium | - |
dc.subject.keywordAuthor | forming limit | - |
dc.subject.keywordAuthor | incremental forming | - |
dc.subject.keywordAuthor | warm temperature | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.