An experimental study of the dynamic characteristics of the catenary-pantograph interface in high speed trains
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Jung Soo | - |
dc.date.accessioned | 2022-01-14T07:41:22Z | - |
dc.date.available | 2022-01-14T07:41:22Z | - |
dc.date.created | 2022-01-14 | - |
dc.date.issued | 2007-12 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/23516 | - |
dc.description.abstract | The dynamic characteristics of the catenary-pantograph interface in high-speed trains are evaluated. During a test run signals from accelerometers, load cells, and strain gauges attached to various parts of the pantograph assembly are collected and processed. The signals are analyzed in both the time and frequency domains to determine the dynamic characteristics of the catenary-pantograph interface constituting the critical part of the current collection system of the high-speed train. It is found that there are major frequency components of the pantograph motion at the interface that shift in direct proportion to the train speed as well as components that are stationary in the frequency domain such as the 8.5 Hz component representing the fundamental resonant mode of the panhead assembly. The contact force at the interface shows that while the mean contact force stays almost invariant, the fluctuating component is significantly dependent on the filtering frequency applied to the accelerometer signal during estimation of the inertia force of the panhead. An important implication of the finding is that analytical or numerical investigations based on lumped element models of the pantograph may provide accurate predictions on mean values of the contact force at the catenary-pantograph interface, but are inherently limited in estimating high-frequency fluctuations in the contact force. Since the ratio of the fluctuating portion to the steady-state portion (i.e., the mean value) increases with increased train speed, the predictive capacity of the investigations based on numerical simulations diminishes with increasing train speed. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | - |
dc.title | An experimental study of the dynamic characteristics of the catenary-pantograph interface in high speed trains | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Jung Soo | - |
dc.identifier.doi | 10.1007/BF03177470 | - |
dc.identifier.scopusid | 2-s2.0-37549001344 | - |
dc.identifier.wosid | 000251946000020 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.21, no.12, pp.2108 - 2116 | - |
dc.relation.isPartOf | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.title | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.volume | 21 | - |
dc.citation.number | 12 | - |
dc.citation.startPage | 2108 | - |
dc.citation.endPage | 2116 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART001203259 | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordAuthor | catenary | - |
dc.subject.keywordAuthor | contact force | - |
dc.subject.keywordAuthor | current collection system | - |
dc.subject.keywordAuthor | dynamics | - |
dc.subject.keywordAuthor | high speed train | - |
dc.subject.keywordAuthor | pantograph | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.