변형 조립체 공차해석 기법을 이용한 판재 용접용 치구 및 용접 점의 위치결정
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이동열 | - |
dc.contributor.author | 임현준 | - |
dc.contributor.author | 지해성 | - |
dc.contributor.author | 소현철 | - |
dc.date.accessioned | 2022-01-14T08:42:12Z | - |
dc.date.available | 2022-01-14T08:42:12Z | - |
dc.date.created | 2022-01-14 | - |
dc.date.issued | 2007 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/23885 | - |
dc.description.abstract | All manufactured parts and tooling have unavoidable variations from their nominal shapes. During assembly, compliant parts are further deformed by relatively rigid assembly tooling. Lack of Knowledge regarding variations and deformations often results in expensive problems. Most current computer-aided design systems are based on ideally sized, ideally located and rigid geometry. This paper proposes a model for the assembly of compliant, non-ideal part. We start by defining tolerance analysis as the process of simulation the variation of a product or a subassembly when given the tolerance of required parts. Analysis is then done by finite element analysis and using the material properties of the actual parts to be assembled. Using the result, estimate the weld process. | - |
dc.publisher | 한국CDE학회 | - |
dc.title | 변형 조립체 공차해석 기법을 이용한 판재 용접용 치구 및 용접 점의 위치결정 | - |
dc.title.alternative | Determination of Fixture Locations and Welding Points Using Tolerance Analysis of Compliant Assembly | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 임현준 | - |
dc.contributor.affiliatedAuthor | 지해성 | - |
dc.identifier.bibliographicCitation | 한국CDE학회 논문집, v.12, no.4, pp.263 - 273 | - |
dc.relation.isPartOf | 한국CDE학회 논문집 | - |
dc.citation.title | 한국CDE학회 논문집 | - |
dc.citation.volume | 12 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 263 | - |
dc.citation.endPage | 273 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001084728 | - |
dc.description.journalClass | 3 | - |
dc.subject.keywordAuthor | Key Words : Compliant Assembly | - |
dc.subject.keywordAuthor | Tolerance Analysis | - |
dc.subject.keywordAuthor | Welding Fixtures | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.