Experimental studies of wide flange beam to square concrete-filled tube column joints with stiffening plates around the column
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, JW | - |
dc.contributor.author | Kang, SM | - |
dc.contributor.author | Yang, SC | - |
dc.date.accessioned | 2022-02-17T03:41:09Z | - |
dc.date.available | 2022-02-17T03:41:09Z | - |
dc.date.created | 2022-02-17 | - |
dc.date.issued | 2005-12 | - |
dc.identifier.issn | 0733-9445 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/25132 | - |
dc.description.abstract | The strength and stiffness of wide flange beams to rectangular tube column joints are reduced significantly if the connections are not reinforced. However, the reinforcement for the connections can be complex and increase the fabrication costs significantly because the tube columns are closed sections. This paper describes the force transfer mechanism and the cyclic performance of wide flange beams to square concrete-filled tube column joints reinforced with stiffening plates around the column. The first phase of this research program was to assess the force transfer mechanism at the joint using an analytical yield line method. An experimental program was conducted to verify the proposed model. The test results showed that the derived nominal strength equation provided a reasonable prediction. As the second phase of the research program, full-scale joint subassemblage tests were conducted to assess the cyclic performance of the joints. A total of seven specimens were tested under cyclic loading. Test results showed that total rotation of 0.04 rad which is required for special moment resisting frames could be obtained. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ASCE-AMER SOC CIVIL ENGINEERS | - |
dc.subject | SECTION MOMENT CONNECTIONS | - |
dc.title | Experimental studies of wide flange beam to square concrete-filled tube column joints with stiffening plates around the column | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, JW | - |
dc.contributor.affiliatedAuthor | Yang, SC | - |
dc.identifier.doi | 10.1061/(ASCE)0733-9445(2005)131:12(1866) | - |
dc.identifier.wosid | 000233538000010 | - |
dc.identifier.bibliographicCitation | JOURNAL OF STRUCTURAL ENGINEERING-ASCE, v.131, no.12, pp.1866 - 1876 | - |
dc.relation.isPartOf | JOURNAL OF STRUCTURAL ENGINEERING-ASCE | - |
dc.citation.title | JOURNAL OF STRUCTURAL ENGINEERING-ASCE | - |
dc.citation.volume | 131 | - |
dc.citation.number | 12 | - |
dc.citation.startPage | 1866 | - |
dc.citation.endPage | 1876 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Construction & Building Technology | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Construction & Building Technology | - |
dc.relation.journalWebOfScienceCategory | Engineering, Civil | - |
dc.subject.keywordPlus | SECTION MOMENT CONNECTIONS | - |
dc.subject.keywordAuthor | experimentation | - |
dc.subject.keywordAuthor | steel beams | - |
dc.subject.keywordAuthor | joints | - |
dc.subject.keywordAuthor | concrete | - |
dc.subject.keywordAuthor | steel plates | - |
dc.subject.keywordAuthor | tubes | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.