Preparation of high-surface-area catalysts supports coated with SiC by CVI
- Authors
- Kim, YJ; Kim, H; Chung, GY
- Issue Date
- Jul-2004
- Publisher
- ELSEVIER SCIENCE INC
- Keywords
- catalyst support; CVI; high surface area; SiC
- Citation
- JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, v.10, no.4, pp.653 - 660
- Journal Title
- JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Volume
- 10
- Number
- 4
- Start Page
- 653
- End Page
- 660
- URI
- https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/25760
- ISSN
- 1226-086X
- Abstract
- In this research, permeating dichlorodimethylsilane (DDS) and depositing a Sic layer on surfaces of spherical activated carbons by CVI was studied in a continuous flow reactor. Related mathematical modeling was also undertaken. The results were compared with those obtained in a fluidized bed reactor [1,2]. It is desirable to coat pore walls uniformly with their pore entrances open. The conditions for obtaining these desirable results were a low pressure and a low DDS concentration, such as 10 torr and 3%, respectively. When the deposition rate constant was 10 cm/min, the modeling and experimental results fit well with one another. At a high total pressure and a high partial pressure of DDS, the initial deposition rate was large, but Sic particles deposited at a low pressure were relatively small and uniform. Less uniform deposition was obtained relative to the deposition obtained in a fluidized bed reactor. The dependence of the morphologies of the deposited Sic on both the pressure and concentration were similar to those obtained in a fluidized bed reactor.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of General Studies > Department of General Studies > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/25760)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.