Effects of processing parameters on liquation cracking of 6005A alloy weldments
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, JH | - |
dc.contributor.author | Lee, DH | - |
dc.contributor.author | Kim, J | - |
dc.contributor.author | Shin, DH | - |
dc.contributor.author | Kim, YS | - |
dc.date.accessioned | 2022-04-14T05:41:05Z | - |
dc.date.available | 2022-04-14T05:41:05Z | - |
dc.date.created | 2022-04-14 | - |
dc.date.issued | 2000-08 | - |
dc.identifier.issn | 1225-9438 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/27341 | - |
dc.description.abstract | The effects of the characteristic microstructure developed in extruded 6005A alloys on tensile properties, fatigue strength, and liquation cracking in the heat affected zone of weldments were investigated, An insitu observation of the grain growth occurring in the sample was made with an optical microscope with a hot stage to determine the temperature of the excessive grain growth during extrusion. The extruded samples were heat heated under various conditions and welded using a gas metal arc welding process. The results indicated that liquation occurred mainly at coarse grain boundaries and significantly influencing the mechanical properties of the joint. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | KOREAN INST METALS MATERIALS | - |
dc.subject | EXTRUSION | - |
dc.subject | MICROSTRUCTURE | - |
dc.title | Effects of processing parameters on liquation cracking of 6005A alloy weldments | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, YS | - |
dc.identifier.doi | 10.1007/BF03028088 | - |
dc.identifier.scopusid | 2-s2.0-0034238465 | - |
dc.identifier.wosid | 000089086700016 | - |
dc.identifier.bibliographicCitation | METALS AND MATERIALS-KOREA, v.6, no.4, pp.395 - 399 | - |
dc.relation.isPartOf | METALS AND MATERIALS-KOREA | - |
dc.citation.title | METALS AND MATERIALS-KOREA | - |
dc.citation.volume | 6 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 395 | - |
dc.citation.endPage | 399 | - |
dc.type.rims | ART | - |
dc.type.docType | Article; Proceedings Paper | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | EXTRUSION | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordAuthor | 6005A aluminum alloy | - |
dc.subject.keywordAuthor | extrusion | - |
dc.subject.keywordAuthor | weldment | - |
dc.subject.keywordAuthor | liquation cracking | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.