콘크리트 응결시간 측정방법 중 현장적용성에 관한 실험적 고찰

Abstract

PURPOSES : The objective of this study is to present a practical application method for measuring the setting time of concrete in the field, considering different concrete blending and curing environments. METHODS : In the experimental environment of the concrete setting experiment, a mold was made in the laboratory, and the curing temperature was performed at laboratory room temperature (20-25 ℃), heater (30 ℃), and dryer (40 ℃). In the field, the experimental method was performed in summer and autumn, setting experiments on penetration resistance, ultrasonic pulse velocity, and semi-calorimeter. RESULTS : The result of the concrete setting time experiment was that the early setting time was achieved in the combination of filash and slag when the concrete was mixed, and the setting time in the curing environment was the same as the early setting time in the field. The setting time measurement method shows the correlation of the high crystal coefficient at UPV with 0.99 based on PR and the good ratio of 92 % to 107 % on average. In addition, the semi-calorimeter shows a good crystal coefficient of 0.96 to 0.99 and a good setting time of 88 % to 101 % on average. CONCLUSIONS : The analysis of the setting time of the concrete shows that the curing temperature is more affected than the mixture, and it is considered that the UPV test, which evaluates the reliability of the degree of purification, is easy to sampie among the three methods.