Numerical Analysis of Horizontal Twin-Roll Casting for AA3003
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, Jong-Jin | - |
dc.date.available | 2020-07-10T04:18:47Z | - |
dc.date.created | 2020-07-06 | - |
dc.date.issued | 2018-10 | - |
dc.identifier.issn | 1073-5623 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/3181 | - |
dc.description.abstract | Molten AA3003 is cooled, solidified, and rolled into a sheet by horizontal twin-roll casting. In the present investigation, this process was numerically analyzed in two dimensions by assuming the melt, the mushy state, and the solidified as an incompressible nonlinear thermo-viscous material. Coupled analyses of flow and heat transfer were repeated for updated meshes by incremental time steps until a steady state was reached. Results for different roll speeds and sheet thicknesses were obtained including the filling stage of roll gap as well as plastic deformation after solidification. Based on these results, an optimum process schedule was proposed for production of AA3003 sheet of 1 mm in thickness where the roll nip gradually decreased from 3 mm through a couple of reductions. Unstable flows with irregular contacts with the roll surface were often encountered during the analysis but settled by adjusting the roll speed or melt head. (C) The Minerals, Metals & Materials Society and ASM International 2018 | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | SPRINGER | - |
dc.subject | MAGNESIUM ALLOYS | - |
dc.subject | ALUMINUM-ALLOYS | - |
dc.subject | PROCESS PARAMETERS | - |
dc.subject | STRIP | - |
dc.subject | CASTER | - |
dc.subject | SHEET | - |
dc.subject | STEEL | - |
dc.subject | BEHAVIOR | - |
dc.subject | MG-AZ31 | - |
dc.subject | FLOW | - |
dc.title | Numerical Analysis of Horizontal Twin-Roll Casting for AA3003 | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, Jong-Jin | - |
dc.identifier.doi | 10.1007/s11661-018-4813-y | - |
dc.identifier.scopusid | 2-s2.0-85049972945 | - |
dc.identifier.wosid | 000443469700038 | - |
dc.identifier.bibliographicCitation | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.49A, no.10, pp.4748 - 4758 | - |
dc.relation.isPartOf | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.citation.title | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.citation.volume | 49A | - |
dc.citation.number | 10 | - |
dc.citation.startPage | 4748 | - |
dc.citation.endPage | 4758 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.subject.keywordPlus | MAGNESIUM ALLOYS | - |
dc.subject.keywordPlus | ALUMINUM-ALLOYS | - |
dc.subject.keywordPlus | PROCESS PARAMETERS | - |
dc.subject.keywordPlus | STRIP | - |
dc.subject.keywordPlus | CASTER | - |
dc.subject.keywordPlus | SHEET | - |
dc.subject.keywordPlus | STEEL | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | MG-AZ31 | - |
dc.subject.keywordPlus | FLOW | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.