Temperature effects on the tensile strength of brazed Fe-Cr-Al alloy (Fecralloy (R)) with Ni-based filler metal and corresponding image processing based analysis
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Shin, Jeong-Heon | - |
dc.contributor.author | Kim, Young | - |
dc.contributor.author | Kim, Jungchul | - |
dc.contributor.author | Sohn, Sangho | - |
dc.contributor.author | Lee, Kong Hoon | - |
dc.contributor.author | Yoon, Seok Ho | - |
dc.date.accessioned | 2023-12-11T07:06:27Z | - |
dc.date.available | 2023-12-11T07:06:27Z | - |
dc.date.issued | 2020-10 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.issn | 1976-3824 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/31906 | - |
dc.description.abstract | Brazing bonding of iron-chromium-aluminum alloy (Fecralloy) with nickel based filler metal (MBF20) were performed at different maximum temperatures, 1000 degrees C and 1100 degrees C by varying the rate of temperature rise, 5 degrees C/min and 10 degrees C/min. And for comparison, diffusion bonding of Fecralloy-Fecralloy was also done with a condition, 1000 degrees C and 10 degrees C/min. For testing the tensile strength, the prepared tensile strength specimens were just bonded for diffusion bonding, and filler metal was inserted between the half specimens for brazing bonding. And in order to visually investigate about the bonding conditions, channeled heat plates were also prepared. The dimension of Fecralloy plates was 49 mm x 24 mm x 2 mm thick with three 2 mm diameter channels and 60 urn thick MBF20 was used as filler metal. The cross section parts of the test specimens were analyzed with SEM (XRD, EDS, EPMA, BSE) images, which were image processed to quantify the penetration depth of both filler and base metals to counter materials and components distribution using image processing. And such quantified results were compared with the tensile strength. From the both analysis, the tensile strength results were correlated with the change of thickness of filler metal as well as the distribution of components at the different bonding conditions. | - |
dc.format.extent | 8 | - |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | - |
dc.title | Temperature effects on the tensile strength of brazed Fe-Cr-Al alloy (Fecralloy (R)) with Ni-based filler metal and corresponding image processing based analysis | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.1007/s12206-020-0812-1 | - |
dc.identifier.scopusid | 2-s2.0-85092340354 | - |
dc.identifier.wosid | 000576369200005 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.10, pp 4129 - 4136 | - |
dc.citation.title | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.volume | 34 | - |
dc.citation.number | 10 | - |
dc.citation.startPage | 4129 | - |
dc.citation.endPage | 4136 | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART002628109 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordPlus | STAINLESS-STEEL | - |
dc.subject.keywordPlus | INTERFACIAL PHASES | - |
dc.subject.keywordPlus | PARTIAL OXIDATION | - |
dc.subject.keywordPlus | PROPANE | - |
dc.subject.keywordPlus | CATALYSTS | - |
dc.subject.keywordPlus | HYDROGEN | - |
dc.subject.keywordPlus | METHANOL | - |
dc.subject.keywordAuthor | · Brazing bonding · Diffusion bonding · Fecralloy · Image processing · Tensile strength | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.