Active SMA Fibers’ Effect on the Pullout Behavior of a Steel Bar Embedded in Concrete
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, E. | - |
dc.contributor.author | Nhan, B.T. | - |
dc.contributor.author | Choi, J. | - |
dc.date.accessioned | 2023-12-11T07:07:07Z | - |
dc.date.available | 2023-12-11T07:07:07Z | - |
dc.date.issued | 2023-03-01 | - |
dc.identifier.issn | 1996-1944 | - |
dc.identifier.issn | 1996-1944 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/32043 | - |
dc.description.abstract | This study investigated the bond behavior and radial crack between concrete and reinforcing bars using cold-drawn shape memory alloy (SMA) crimped fibers controlled by the temperature and volume fraction of the fibers. In this novel approach, the concrete specimens containing cold-drawn SMA crimped fibers with 1.0% and 1.5% volume fractions of cold-drawn SMA fibers were prepared. After that, the specimens were heated to 150 °C to generate recovery stress and activate prestressing within the concrete. The bond strength of specimens was estimated by pullout test using the universal testing machine (UTM). Furthermore, the cracking patterns were investigated using radial strain measured by a circumferential extensometer. The results showed that adding up to 1.5% of SMA fibers improved the bond strength by 47.9% and reduced radial strain by more than 54%. Thus, heating specimens containing SMA fibers showed improved bond behavior compared with non-heated specimens with the same volume fraction. © 2023 by the authors. | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | MDPI | - |
dc.title | Active SMA Fibers’ Effect on the Pullout Behavior of a Steel Bar Embedded in Concrete | - |
dc.type | Article | - |
dc.publisher.location | 스위스 | - |
dc.identifier.doi | 10.3390/ma16051947 | - |
dc.identifier.scopusid | 2-s2.0-85149885736 | - |
dc.identifier.wosid | 000947333800001 | - |
dc.identifier.bibliographicCitation | Materials, v.16, no.5 | - |
dc.citation.title | Materials | - |
dc.citation.volume | 16 | - |
dc.citation.number | 5 | - |
dc.type.docType | Article | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalResearchArea | Physics | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Physical | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Physics, Applied | - |
dc.relation.journalWebOfScienceCategory | Physics, Condensed Matter | - |
dc.subject.keywordPlus | REINFORCING BARS | - |
dc.subject.keywordPlus | BOND STRENGTH | - |
dc.subject.keywordPlus | CAPACITY | - |
dc.subject.keywordPlus | TENSILE | - |
dc.subject.keywordPlus | MORTAR | - |
dc.subject.keywordPlus | MODEL | - |
dc.subject.keywordAuthor | active fibers | - |
dc.subject.keywordAuthor | active prestressing | - |
dc.subject.keywordAuthor | bond behavior | - |
dc.subject.keywordAuthor | high temperature | - |
dc.subject.keywordAuthor | SMA crimped fiber | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.