Effects of fuel physical properties on direct injection spray and ignition behavior
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김두현 | - |
dc.date.available | 2020-07-10T06:05:36Z | - |
dc.date.created | 2020-07-08 | - |
dc.date.issued | 2016-04-06 | - |
dc.identifier.issn | 0016-2361 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/7992 | - |
dc.description.abstract | CFD simulations of reacting fuel sprays were conducted to identify temperature-dependent physical properties of the liquid fuel that should be emulated by diesel and jet fuel surrogates during compression ignited combustion. Using a validated CFD model for an n-dodecane spray under diesel-relevant conditions, six physical properties of the liquid phase fuel (density, vapor pressure, viscosity, surface tension, heat of vaporization, and specific heat capacity) were perturbed covering the minimum and maximum property range of hydrocarbons widely used in recent diesel and jet fuel surrogates. Liquid fuel density, viscosity, vapor pressure, and specific heat had significant impact on liquid penetration length, causing a 4-16% change from the baseline n-dodecane case. The changes resulted from the liquid fuel's influence on various physical phenomena, including droplet breakup, air entrainment and evaporation. For ignition delay, specific heat and density effects were most significant, with up to 10% changes from the baseline case. Specific heat perturbations affected the thermal energy necessary for fuel vaporization, hence local temperature development and mixture reactivity. Liquid density influenced the velocity of the fuel injection event, which modified turbulent mixing rates, low temperature heat release characteristics and the transition to high temperature ignition. The results of this study indicate that liquid density, specific heat, viscosity, and vapor pressure should be considered for surrogate development to properly capture the liquid penetration and ignition delay characteristics of the target fuel. (C) 2016 Elsevier Ltd. All rights reserved. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.title | Effects of fuel physical properties on direct injection spray and ignition behavior | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김두현 | - |
dc.identifier.bibliographicCitation | FUEL, v.180, no.1, pp.481 - 496 | - |
dc.relation.isPartOf | FUEL | - |
dc.citation.title | FUEL | - |
dc.citation.volume | 180 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 481 | - |
dc.citation.endPage | 496 | - |
dc.type.rims | ART | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.