삽입금속 Cu를 적용한 TiAl 합금과 SCM440의 마찰용접 계면의 나노역학물성 평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최인철 | - |
dc.contributor.author | 김기영 | - |
dc.contributor.author | 오명훈 | - |
dc.date.accessioned | 2021-12-21T07:40:15Z | - |
dc.date.available | 2021-12-21T07:40:15Z | - |
dc.date.issued | 2021-11 | - |
dc.identifier.issn | 1225-1070 | - |
dc.identifier.issn | 2508-4046 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/20310 | - |
dc.description.abstract | Due to the superior corrosion resistance and mechanical properties of TiAl alloy at high temperature, it has been utilized as a turbine wheel of a turbocharger. The dissimilar metallic bonding is usually applied to com bine the TiAl turbine wheel with the SCM440 structural steel which is used as a driving shaft. In this study, the TiAl and SCM440 joint were fabricated by using a friction welding technique. During bonding process, to sup press the martensitic transformation and the formation of cracks, which might reduce a strength of the joints, Cu was used as an insert metal to relieve stress. As a result, the intermetallic compounds (IMCs) layer was observed at TiAl/Cu interface while no IMC formation was formed at SCM440/Cu interface. Since understanding of the IMCs effects on the mechanical performance of welded joint is also essential for ensuring the reliability and integ rity of the turbocharger system, we estimated the nanohardness of welded joint region through nanoindentation. The relation between the microstructural feature and its mechanical property is discussed in detail. | - |
dc.format.extent | 6 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국열처리공학회 | - |
dc.title | 삽입금속 Cu를 적용한 TiAl 합금과 SCM440의 마찰용접 계면의 나노역학물성 평가 | - |
dc.title.alternative | Evaluating Nanomechanical Properties on Interface of Friction-welded TiAl and SCM440 Alloys with Cu as an Insert Metal | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.12656/jksht.2021.34.6.309 | - |
dc.identifier.bibliographicCitation | 열처리공학회지, v.34, no.6, pp 1 - 6 | - |
dc.citation.title | 열처리공학회지 | - |
dc.citation.volume | 34 | - |
dc.citation.number | 6 | - |
dc.citation.startPage | 1 | - |
dc.citation.endPage | 6 | - |
dc.identifier.kciid | ART002779793 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | TiAl | - |
dc.subject.keywordAuthor | Friction welding | - |
dc.subject.keywordAuthor | Intermetallics | - |
dc.subject.keywordAuthor | Nanoindentation | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.