인체 마네킨 조각의 최적 3D 프린팅 출력 배향 정보에 대한 정량적 분석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정진영 | - |
dc.contributor.author | 설인환 | - |
dc.date.accessioned | 2022-05-16T00:40:05Z | - |
dc.date.available | 2022-05-16T00:40:05Z | - |
dc.date.created | 2022-04-25 | - |
dc.date.issued | 2022-02 | - |
dc.identifier.issn | 1225-1089 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/21065 | - |
dc.description.abstract | This study presents experimental information on human manikin optimal orientationfor nonprofessional 3D printer users. We displayed the required number of filamentswith a 3D parametric graph, in which the rotational angles with respect to the global XandY-axes were the parameters. Three scales of human manikin data, including 1/1, 1/4,and 1/10, were prepared and automatically dissected using the algorithm developed inour previous study. The dissected parts were converted to G-codes using slicing softwareto determine the optimal orientation that minimizes the amount of support structure. Thefinal parametric graph verified that the manikin of 1/10 scale full body had the lowest supportstructure when it was on the back of the 3D printer bed. The other scales had the optimalorientation when the cylindrical center of each part of the axis coincided with theglobal Z-axis. The 1/1 manikin was converted into a shell structure, and the same procedurewas repeated. Finally, an actual PLA-based human manikin was 3D printed using theoptimal orientation information. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국섬유공학회 | - |
dc.title | 인체 마네킨 조각의 최적 3D 프린팅 출력 배향 정보에 대한 정량적 분석 | - |
dc.title.alternative | Quantitative Analysis on Optimal 3D Printing Orientation Information of Human Manikin Pieces | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 정진영 | - |
dc.contributor.affiliatedAuthor | 설인환 | - |
dc.identifier.bibliographicCitation | 한국섬유공학회지, v.59, no.1, pp.17 - 23 | - |
dc.relation.isPartOf | 한국섬유공학회지 | - |
dc.citation.title | 한국섬유공학회지 | - |
dc.citation.volume | 59 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 17 | - |
dc.citation.endPage | 23 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002814968 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | human manikin | - |
dc.subject.keywordAuthor | 3D printing | - |
dc.subject.keywordAuthor | optimal orientation | - |
dc.subject.keywordAuthor | printing scale | - |
dc.subject.keywordAuthor | g-code | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.