2속성 강건 설계를 이용한 박판성형공정의 최적화
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김경모 | - |
dc.contributor.author | 인정제 | - |
dc.contributor.author | 박종천 | - |
dc.date.available | 2020-04-24T12:25:46Z | - |
dc.date.created | 2020-03-31 | - |
dc.date.issued | 2014 | - |
dc.identifier.issn | 1598-6721 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/2113 | - |
dc.description.abstract | Fractures and wrinkles are two major defects frequently found in the sheet metal forming process. The process has several noise factors that cannot be ignored when determining the optimal process conditions. Therefore, without any countermeasures against noise, attempts to reduce defects through optimal design methods have often led to failure. In this study, a new and robust design methodology that can reduce the possibility of formation of fractures and wrinkles is presented using decision-making theory. A two-attribute value function is presented to form the design metric for the sheet metal forming process. A modified complex method is adopted to isolate the optimal robust design variables. One of the major limitations of the traditional robust design methodology, which is based on an orthogonal array experiment, is that the values of the optimal design variables have to coincide with one of the experimental levels. As this restriction is eliminated in the complex method, a better solution can be expected. The procedure of the proposed method is illustrated through a robust design of the sheet metal forming process of a side member of an automobile body. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국기계가공학회 | - |
dc.title | 2속성 강건 설계를 이용한 박판성형공정의 최적화 | - |
dc.title.alternative | Optimization of Sheet Metal Forming Process Based on Two-Attribute Robust Design Methodology | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김경모 | - |
dc.identifier.doi | 10.14775/ksmpe.2014.13.2.055 | - |
dc.identifier.bibliographicCitation | 한국기계가공학회지, v.13, no.2, pp.55 - 63 | - |
dc.citation.title | 한국기계가공학회지 | - |
dc.citation.volume | 13 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 55 | - |
dc.citation.endPage | 63 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001873350 | - |
dc.description.journalClass | 2 | - |
dc.subject.keywordAuthor | 박판성형공정 | - |
dc.subject.keywordAuthor | 강건 설계 | - |
dc.subject.keywordAuthor | 가치함수 | - |
dc.subject.keywordAuthor | 선호도 | - |
dc.subject.keywordAuthor | 콤플렉스법 | - |
dc.subject.keywordAuthor | Sheet Metal Forming | - |
dc.subject.keywordAuthor | Robust Design | - |
dc.subject.keywordAuthor | Value Function | - |
dc.subject.keywordAuthor | Preference | - |
dc.subject.keywordAuthor | Complex Method | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.