Detailed Information

Cited 0 time in webofscience Cited 3 time in scopus
Metadata Downloads

가압-진공 하이브리드 주입 성형에 의한 알루미나의 성형에 미치는 다단 가압의 영향

Full metadata record
DC Field Value Language
dc.contributor.author조경식-
dc.contributor.author이현권-
dc.contributor.author우병준-
dc.date.available2020-04-24T12:26:11Z-
dc.date.created2020-03-31-
dc.date.issued2013-
dc.identifier.issn1229-7801-
dc.identifier.urihttps://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/2223-
dc.description.abstractConventional cold isostatic pressing, slip casting, and filter pressing are not completely suitable for fabricating large plates because of disadvantages such as the high cost of equipment and formation of density gradient. These problems could be avoided by employing pressure-vacuum hybrid slip casting (PVHSC). In the PVHSC, the consolidation occurs not only by the compression of the slip in casting room, but also by vacuum sucking of the dispersion medium around the mold. We prepared the alumina bodies by the PVHSC in a static- or stepwise-pressure manner for loading up to 0.5 MPa using an aqueous slip. The green bodies were dried at 30oC with 40 ~ 80% relative humidity. Under static pressure, casting induced a density gradient in the formed body, resulting in cracking and distortion after the firing. However, the stepwise pressure loading resulted in green bodies with homogeneous density, and the minimization of the appearance of those defects in final products. Desirable drying results were obtained from the cast bodies dried with 80% RH environment humidity. When sintered at 1650oC for 4 h, the alumina plate made by stepwise-pressure casting reached full density (> 99.7% relative density).-
dc.language한국어-
dc.language.isoko-
dc.publisher한국세라믹학회-
dc.title가압-진공 하이브리드 주입 성형에 의한 알루미나의 성형에 미치는 다단 가압의 영향-
dc.title.alternativeEffect of Step Pressure on Shape Forming of Alumina by Pressure-Vacuum Hybrid Slip Casting-
dc.typeArticle-
dc.contributor.affiliatedAuthor조경식-
dc.identifier.doi10.4191/kcers.2013.50.2.142-
dc.identifier.scopusid2-s2.0-84875834966-
dc.identifier.bibliographicCitation한국세라믹학회지, v.50, no.2, pp.142 - 148-
dc.citation.title한국세라믹학회지-
dc.citation.volume50-
dc.citation.number2-
dc.citation.startPage142-
dc.citation.endPage148-
dc.type.rimsART-
dc.identifier.kciidART001754350-
dc.description.journalClass1-
dc.subject.keywordAuthorAlumina-
dc.subject.keywordAuthorSlip casting-
dc.subject.keywordAuthorShape forming-
dc.subject.keywordAuthorPressure slip casting-
dc.subject.keywordAuthorVacuum slip casting-
Files in This Item
There are no files associated with this item.
Appears in
Collections
Department of Materials Science and Engineering > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher CHO, KYEONG SIK photo

CHO, KYEONG SIK
College of Engineering (Department of Materials Science and Engineering)
Read more

Altmetrics

Total Views & Downloads

BROWSE