Effects of Turbine Inlet Temperature on Performance of Regenerative Gas Turbine System with Afterfogging
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김경훈 | - |
dc.contributor.author | 김세웅 | - |
dc.contributor.author | 고형종 | - |
dc.date.accessioned | 2023-12-11T12:00:31Z | - |
dc.date.available | 2023-12-11T12:00:31Z | - |
dc.date.issued | 2009 | - |
dc.identifier.issn | 2010-1325 | - |
dc.identifier.issn | 2010-1333 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23009 | - |
dc.description.abstract | Afterfogging of the regenerative gas turbine system has an advantage over inlet fogging in that the high outlet tem-perature of air compressor makes the injection of more water and the recuperation of more exhaust heat possible. This study investigates the effects of turbine inlet temperature (TIT) on the performance of regenerative gas turbine system with afterfogging through a thermodynamic analysis model. For the standard ambient conditions and the water injection ratios up to 5%, the variation of system performance including the thermal efficiency is numerically analyzed with respect to the variations of TIT and pressure ratio. It is also analyzed how the maximum thermal efficiency, net specific work, and pressure ratio itself change with TIT at the peak points of thermal efficiency curve. All of these are found to increase almost linearly with the increases of both TIT and water injection ratio. | - |
dc.format.extent | 8 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | 대한설비공학회 | - |
dc.title | Effects of Turbine Inlet Temperature on Performance of Regenerative Gas Turbine System with Afterfogging | - |
dc.type | Article | - |
dc.publisher.location | 싱가폴 | - |
dc.identifier.bibliographicCitation | International Journal of Air-Conditioning and Refrigeration, v.17, no.4, pp 141 - 148 | - |
dc.citation.title | International Journal of Air-Conditioning and Refrigeration | - |
dc.citation.volume | 17 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 141 | - |
dc.citation.endPage | 148 | - |
dc.identifier.kciid | ART001406959 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kciCandi | - |
dc.subject.keywordAuthor | Afterfogging | - |
dc.subject.keywordAuthor | Gas turbine | - |
dc.subject.keywordAuthor | Regeneration | - |
dc.subject.keywordAuthor | Turbine inlet temperature (TIT) | - |
dc.subject.keywordAuthor | Water injection | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.