자동차 리어램프 반사판의 사출공정에 따른 변형 패턴 분석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최현진 | - |
dc.contributor.author | 박철우 | - |
dc.contributor.author | 최성대 | - |
dc.date.accessioned | 2023-12-11T12:00:32Z | - |
dc.date.available | 2023-12-11T12:00:32Z | - |
dc.date.issued | 2010 | - |
dc.identifier.issn | 1598-6721 | - |
dc.identifier.issn | 2288-0771 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23049 | - |
dc.description.abstract | One of the most common engineering processes using plastics is the injection molding. In addition, plastics are utilized over the entire areas in our life including cars and home appliances among others for their characteristics with no deterioration even after a long time, as well as for their light weights in addition to their good durability. This paper aimed to minimize defects through prior analyses on the weld line, air traps, filling time, molding temperature and deformation patterns among others while carrying out interpretations on the cooling, filling and deformation in the injection process using the moldflow for rear lamp reflectors among components for a car in making parts through the coating process after injection. | - |
dc.format.extent | 6 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국기계가공학회 | - |
dc.title | 자동차 리어램프 반사판의 사출공정에 따른 변형 패턴 분석 | - |
dc.title.alternative | Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of Automotive | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 한국기계가공학회지, v.9, no.4, pp 32 - 37 | - |
dc.citation.title | 한국기계가공학회지 | - |
dc.citation.volume | 9 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 32 | - |
dc.citation.endPage | 37 | - |
dc.identifier.kciid | ART001471990 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Injection Process(사출공정) | - |
dc.subject.keywordAuthor | Injection Analysis(사출해석) | - |
dc.subject.keywordAuthor | Rear Lamp Reflectors(후면램프 반사경) | - |
dc.subject.keywordAuthor | Weld Line(웰드라인) | - |
dc.subject.keywordAuthor | Deformation Patterns(변형패턴) | - |
dc.subject.keywordAuthor | Air Trape(에어트랩) | - |
dc.subject.keywordAuthor | Injection Process(사출공정) | - |
dc.subject.keywordAuthor | Injection Analysis(사출해석) | - |
dc.subject.keywordAuthor | Rear Lamp Reflectors(후면램프 반사경) | - |
dc.subject.keywordAuthor | Weld Line(웰드라인) | - |
dc.subject.keywordAuthor | Deformation Patterns(변형패턴) | - |
dc.subject.keywordAuthor | Air Trape(에어트랩) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.