Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Al6061 소재의 소구경 고속측면밀링특성에 관한 연구
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 박휘근 | - |
| dc.contributor.author | 이상민 | - |
| dc.contributor.author | 이충석 | - |
| dc.contributor.author | 채승수 | - |
| dc.contributor.author | 이원석 | - |
| dc.contributor.author | 최윤서 | - |
| dc.contributor.author | 조현택 | - |
| dc.contributor.author | 백영종 | - |
| dc.contributor.author | 이종찬 | - |
| dc.date.accessioned | 2023-12-11T12:00:36Z | - |
| dc.date.available | 2023-12-11T12:00:36Z | - |
| dc.date.issued | 2012 | - |
| dc.identifier.issn | 1598-6721 | - |
| dc.identifier.issn | 2288-0771 | - |
| dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23189 | - |
| dc.description.abstract | In this paper, the high speed milling characteristics of Al6061 was studied. A gantry type milling & tapping center was developed for this study. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the surface roughness is relative to the cutting conditions. | - |
| dc.format.extent | 5 | - |
| dc.language | 한국어 | - |
| dc.language.iso | KOR | - |
| dc.publisher | 한국기계가공학회 | - |
| dc.title | Al6061 소재의 소구경 고속측면밀링특성에 관한 연구 | - |
| dc.title.alternative | A Study on the Characteristics of High-Speed Small-Diameter Wipe Milling for Al6061 | - |
| dc.type | Article | - |
| dc.publisher.location | 대한민국 | - |
| dc.identifier.bibliographicCitation | 한국기계가공학회지, v.11, no.3, pp 24 - 28 | - |
| dc.citation.title | 한국기계가공학회지 | - |
| dc.citation.volume | 11 | - |
| dc.citation.number | 3 | - |
| dc.citation.startPage | 24 | - |
| dc.citation.endPage | 28 | - |
| dc.identifier.kciid | ART001667535 | - |
| dc.description.isOpenAccess | N | - |
| dc.description.journalRegisteredClass | kci | - |
| dc.subject.keywordAuthor | High Speed Milling(고속밀링가공) | - |
| dc.subject.keywordAuthor | Cutting Force(절삭력) | - |
| dc.subject.keywordAuthor | Surface Roughness(표면조도) | - |
| dc.subject.keywordAuthor | Build up Edge(구성인선) | - |
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Mechanical Design Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.