밀링용 인서트의 가공특성에 관한 연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조준현 | - |
dc.contributor.author | 황인환 | - |
dc.contributor.author | 박상현 | - |
dc.contributor.author | 이종찬 | - |
dc.date.accessioned | 2023-12-11T12:30:33Z | - |
dc.date.available | 2023-12-11T12:30:33Z | - |
dc.date.issued | 2013 | - |
dc.identifier.issn | 1598-6721 | - |
dc.identifier.issn | 2288-0771 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23270 | - |
dc.description.abstract | This paper reports some experimental results on the machining performance of ground & non-ground milling inserts. Five kinds of milling inserts were manufactured without grinding process and one milling insert was manufactured with grinding process. Machining experiments were carried out to compare the performance of ground & non-ground inserts. This experimental result indicate that tool wear, cutting force and surface roughness of the each tool. From the result five milling inserts that have non-grinding process and one milling insret that have grinding process compared appear. | - |
dc.format.extent | 5 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국기계가공학회 | - |
dc.title | 밀링용 인서트의 가공특성에 관한 연구 | - |
dc.title.alternative | Study on the Machining Characteristics of Cutting Inserts | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 한국기계가공학회지, v.12, no.3, pp 76 - 80 | - |
dc.citation.title | 한국기계가공학회지 | - |
dc.citation.volume | 12 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 76 | - |
dc.citation.endPage | 80 | - |
dc.identifier.kciid | ART001786776 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Milling | - |
dc.subject.keywordAuthor | Insert | - |
dc.subject.keywordAuthor | Cutting Force | - |
dc.subject.keywordAuthor | Surface Roughness | - |
dc.subject.keywordAuthor | Tool Wear | - |
dc.subject.keywordAuthor | 밀링 | - |
dc.subject.keywordAuthor | 인서트 | - |
dc.subject.keywordAuthor | 절삭력 | - |
dc.subject.keywordAuthor | 표면조도 | - |
dc.subject.keywordAuthor | 공구마모 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.